Manual Aeris F11 (page 15 of 36) (English)

618082

Zoom out

Zoom in

1/36

F11 OPERATING MANUAL

FREE CDT (COUNTDOWN TIMER)

The FREE Mode CDT (which is not the same one as the Watch CDT) counts down time values in minutes:seconds.

Unless it is set Off, it is displayed on the Surface Main and if a dive is started it will be displayed on the Dive Main.

When set for Auto, the countdown will keep repeating after counting down to 0:00 until stopped by S (< 2 sec).

CDT Lead-in, information includes (Fig. 24):

> Graphics Go To and Cdt with icon.

• S (< 2 sec) - to access CDT Setup.

• A (< 2 sec) - to step forward to Set Alarms Lead-in.

• M (< 2 sec) - to step back to SURF ALT 2.

• M (2 sec), or 2 minutes of no button action, will revert to SURF MAIN.

• L (< 2 sec) - to toggle the Backlight On/Off.

Will be On for the duration time set.

• L (2 sec), while the Backlight is On, - to reset the timer to keep it On for the full duration time set.

CDT Setup, information includes (Fig. 25A/B/C):

> Countdown Time (min:sec) as >>

0:00 if no time has been set, or it completed the countdown; or -

min:sec set if Off (or Auto) and ready to start; or -

min:sec remaining if On (or Auto) with a countdown in progress.

> Graphic Cdt.

> Graphic OFF (or ON, or Auto) ﬂashing (Fig. 25A).

• A (< 2 sec) - to step forward through selections of OFF, ON, AUTO (Fig. 25B), and SET (Fig. 25C).

• M (< 2 sec) - to step back through the selections.

• S (< 2 sec) - to save the selection.

>> If OFF, ON, or AUTO is selected, operation reverts to the Lead-in screen.

>> If SET is selected, the Set CDT screen is displayed.

• S (2 sec) - to revert to CDT Lead-in, if no setting change.

• M (2 sec), or 2 minutes of no button action, will revert to SURF MAIN.

• L (< 2 sec) - to toggle the Backlight On/Off.

Will be On for the duration time set.

• L (2 sec), while the Backlight is On, - to reset the timer to keep it On for the full duration time set.

Set CDT, information includes (Fig. 26):

> Timer setting (min:sec) with icons, with Minute digits ﬂashing.

> Graphics Cdt and SEt.

• A (hold) - to scroll upward through Minute set points (8/sec) from 0: to 59: in increments of 1: (min).

• A (< 2 sec) - to step upward through Minute set points.

• M (< 2 sec) - to step back through set points.

• S (< 2 sec) - to save the Minute setting and ﬂash the Seconds digits.

• A (hold) - to scroll upward through Seconds set points (8/sec) from :00* to :59 in increments of :01 (sec).

*Starts at :30 (sec) minimum when Minutes are set for 0: (min).

• A (< 2 sec) - to step upward through Seconds set points.

• M (< 2 sec) - to step back through set points one at a time.

• S (< 2 sec) - to save the CDT setting and revert to the CDT Status screen with SEt ﬂashing, allowing ON or OFF to be selected

as previously described.

• S (2 sec) - to revert to CDT Setup, if no setting change.

• M (2 sec), or 2 minutes of no button action, will revert to SURF MAIN.

• L (< 2 sec) - to toggle the Backlight On/Off.

Will be On for the duration time set.

• L (2 sec), while the Backlight is On, - to reset the timer to keep it On for the full duration time set.

------------------------------------------------------------------------------------------------------------------------------------------------------------

Fig.24 - CDT LEAD-IN

Fig. 25A - CDT SETUP

(upon access)

or 

Fig. 25C - CDT SETUP

(to access Set)

Fig. 26 - SET CDT

Fig. 25B - CDT SETUP

(upon access)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Aeris F11 in the language / languages: English as an attachment in your email.

The manual is 7,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Aeris F11 Manual

Product: