618082

Aeris F11 Manual

14
Zoom out
Zoom in
Previous page
1/36
Next page
14
F11 OPERATING MANUAL
© 2002 Design, 2013 Doc. No. 12-7285-r01 (5/3/13)
SURFACE MODE
Surface Main is the default screen displayed while in FREE Mode. In addition to Surface Interval Time and Dive Number, a CDT
(Countdown Timer) is displayed (unless it is set Off) which you can start, stop, and reset.
Like Watch mode, you can access a sequence of selections including >>
ALTs (additional data), Countdown Timer, Set Alarms, Set Utilities, Serial Number, and Chronograph.
The CDT is separate from the one featured in Watch Mode.
The Chronograph is the same one as Watch Mode with it's operations carrying over between the two modes.
Button operations >>
• A (< 2 sec) - to step forward through the sequence of selections.
• M (< 2 sec) - to step back through selections.
• M (2 sec, any time) - to revert to Surface Main.
• No button action (2 min) - revert to Surface Main.
• L - to activate the Backlight.
Descent to the DSD (Dive Start Depth) set for 1 second will activate Dive Mode, which will be displayed in the background if the
Chrono is on display.
Setting the DSD (for 2, 4, or 6 FT; or 0.6, 1.2, or 1.8 M) is explained later in the Set Utilities section.
Upon ascent to 2 FT (0.6 M) for 1 second, the Dive Main will remain on display until the BDSI (Between Dive Surface Interval) time
set elapses then the Surface Main will be displayed.
Setting the BDSI (up to 1 minute) is explained later in the Set Utilities section.
When set On, the SRT (Surface Recovery Time) alarm will sound and flash a message when the Surface Interval after surfacing
reaches the time set.
Setting the SRT alarm (up to 30 minutes) is explained later in the Set Alarms section.
When 2 hours elapse after surfacing, operation will revert to Watch Mode. M (2 sec) will access or return from Watch Mode.
SURF MAIN, information includes (Fig. 21A/B):
> Graphic FREE, or CDT (min:sec) with icons.
> Surface Interval Time (hr:min_sec) with SURF and sec icons.
> Number of the last dive conducted that calendar day with DIVE icon. If no dive has been made yet that day, or if Dive # is
reset by A+S (2 sec), 0 will be displayed.
> Battery icon, if a Low Battery condition.
• A (< 2 sec) to access SURF ALT 1, and step forward through the sequence of selections.
• A (2 sec) to access Log/History.
• A + S (2 sec) to reset Dive # to 0.
• M (< 2 sec) to access Chrono Lead-in, and step back through the group sequence.
• M (2 sec) to access Watch Main.
• S (< 2 sec) to start*/stop CDT. *
When the CDT is set for Auto, it will reset and repeat the countdown when it reaches 0:00.
• S (2 sec) to reset the CDT to the time set.
• L (< 2 sec) - to toggle the Backlight On/Off.
Will be On for the duration time set.
• L (2 sec), while the Backlight is On, - to reset the timer to keep it On for the full duration time set.
SURF ALT 1, information includes (Fig. 22):
> Graphic LAST, indicating data is from the last dive.
> Max Depth with MAX and FT (or M) icons.
Dashes if no previous dive conducted.
> Elapsed Dive Time (min:sec) with DIVE and min_sec icons.
Dashes if no previous dive conducted.
• A (< 2 sec) - to step forward to ALT 2.
• M (< 2 sec) - to step back to SURF MAIN.
• Reverts to Main in 10 seconds if A or M is not pressed.
• L (< 2 sec) - to toggle the Backlight On/Off.
Will be On for the duration time set.
• L (2 sec), while the Backlight is On, - to reset the timer to keep it On for the full duration time set.
SURF ALT 2, information includes (Fig. 23):
> Day of Week graphic.
> Time of Day (hr:min_sec) with AM (or PM) icon if 12 Hour Format, no icon if 24 Hour.
> Temperature with °F (or °C).
• A (< 2 sec) - to step forward to CDT.
• M (< 2 sec) - to step back to ALT 1.
• Reverts to Main in 10 seconds if A or M is not pressed.
• L (< 2 sec) - to toggle the Backlight On/Off.
Will be On for the duration time set.
• L (2 sec), while the Backlight is On, - to reset the timer to keep it On for the full duration time set.
Fig. 21A - SURF MAIN
(no dive yet, CDT Off)
Fig. 21B - SURF MAIN
(CDT running)
Fig. 22 - SURF ALT 1
Fig. 23 - SURF ALT 2
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeris F11 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeris F11 in the language / languages: English as an attachment in your email.

The manual is 7,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info