Manual Aeris F11 (page 12 of 36) (English)

618082

Zoom out

Zoom in

1/36

F11 OPERATING MANUAL

• A (hold) - to scroll upward through Year set points (8/sec) from 2013 to 2055, in increments of 1.

• A (< 2 sec) - to step upward through Year set points.

• M (< 2 sec) - to step back through set points.

• S (< 2 sec) - to save the Year setting and ﬂash the Month digits.

• S (2 sec) - to step back to Set Time of Day.

• A (hold) - to scroll upward through Month set points (8/sec) from 1 to 12 in increments of 1.

• A (< 2 sec) - to step upward through set points.

• M (< 2 sec) - to step back through set points.

• S (< 2 sec) - to save the Month Set point and ﬂash the Day digits.

• S (2 sec) - to step back to Set Year.

• A (hold) - to scroll upward through Day set points (8/sec) from 1 to 31 (max for that month) in increments of 1.

• A (< 2 sec) - to step upward through set points.

• M (< 2 sec) - to step back through set points.

• S (< 2 sec) - to save the Date setting and revert to Set Time Lead-in.

• S (2 sec) - to step back to Set Month.

• M (2 sec), or 2 minutes of no button action, will revert to Watch Main Time.

CHRONOGRAPH (Stop Watch, Lap/Run Timer)

The Chrono is operational during all modes (Watch, Free Surface, and Dive). Once started, the Chrono remains on the display and

continues to run until S is pressed to revert to the Lead-in screen (if in Watch or FREE Surface mode) or to the Dive Main (if a dive

was started while the Chrono was running). It runs unseen in the background when not on display.

Chrono Lead-in, information includes (Fig. 18):

> Graphics Go To and CHro.

• S (< 2 sec) - to access Chrono Status.

• A (< 2 sec) - to step forward to Watch Main.

• M (< 2 sec) - to step back to Set Time Lead-in.

• M (2 sec), or 2 minutes of no button action, will revert to Watch Main Time.

• L (< 2 sec) - to toggle the Backlight On/Off.

Will be On for the duration time set.

• L (2 sec), while the Backlight is On, - to reset the timer to keep it On for the full duration time set.

Chrono Status, information includes (Fig. 19A/B):

> Graphic CHRO with min & sec icons.

> Elapsed run time >> ﬂashing as 0:00_00 if not yet started or after reset; or counting up to 199:59_99 (min:sec_ .01 sec) if

previously started.

After the ﬁrst 4.99 seconds, the .01 digits display 2 dashes ( - - ).

> Graphic LAP1 (up to 9), once started, blank if not.

• S* (< 2 sec) - to start the Timer which begins counting up in increments of .01 sec.

• S* (< 2 sec) - to save that Lap's time and display the next Lap # (up to 9, then restart with 1) with the Timer continuing to count

up, displaying total run time.

• A (< 2 sec) - to stop the Timer and recall LAP1 (up to 9) ﬂashing with it's time (Fig. 20).

Repeat to recall other Lap times.

• A (2 sec) - to reset total run time to 0:00_00.

• S* (2 sec) - to step back to the Chrono Lead-in.

• L (< 2 sec) - to toggle the Backlight On/Off.

Will be On for the duration time set.

• L (2 sec), while the Backlight is On, - to reset the timer to keep it On for the full duration time set.

*Chrono operations are blocked when S is operated during a alarm strike.

------------------------------------------------------------------------------------------------------------------------------------------------------------

If no dive is conducted within 2 hours after accessing Free Mode, operation will revert to Watch Main Time.

Operation will also revert from Free Surface Mode to Watch Main Time 2 hours after completion of a dive or

if M is pressed (for 2 seconds) while viewing Free Surface Main.

Fig. 19A - CHRONO

STATUS (just started)

Fig. 19B - CHRONO

STATUS (running)

Fig. 20 - CHRONO LAP

RECALL

Fig. 18 - CHRONO

LEAD-IN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Aeris F11 in the language / languages: English as an attachment in your email.

The manual is 7,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Aeris F11 Manual

Product: