618065
42
Zoom out
Zoom in
Previous page
1/56
Next page
42
A300/A300 XT OPERATING MANUAL
© 2002 Design, 2012 Doc. No. 12-7255-r01 (5/14/12)
FREE Countdown Timer (CDT)
The CDT, which can only be set while on the surface, is by default displayed on the Dive ALT 1 screen. It can be interchanged
with EDT (Elapsed Dive Time) and displayed on the Dive Main with EDT moving to the ALT 1 screen.
If the CDT is started and running while on the surface, it will continue to run upon entry into Dive Mode. It will also continue to
run upon surfacing after a dive until shut Off or time reaches 0:00.
FREE DIVE MAIN, information includes (Fig. 113A/B) -
> Current Depth with FT (or M) icon.
> Temperature with °F (or °C) icon, if EDT is displayed.
> EDT (min:sec) up to 9:59 then dashes with wave/clock icon, or -
graphic CD and countdown time with clock icon, counting down from time set (min:sec) before the dive to 0:00.
> TLBG, if any from FREE, NORM, or TECH dives that activation period.
A (< 2 sec) to access ALT 1.
M (2 sec) to interchange EDT with the CDT and move EDT to ALT 1.
S (< 2 sec) to Start/Stop the CDT, if displayed and active.
S (2 sec) to Reset the CDT to the time set before the dive, if in use.
S (press) to activate Smartglo
®
Backlight.
FREE DIVE ALT 1, information includes (Fig. 114A/B) -
> Max Depth with FT (or M) and MAX icons.
> Temperature with °F (or °C) icon, if EDT is displayed.
> Graphic CD and countdown time with clock icon, counting down from time set (min:sec) before the dive to 0:00; or -
EDT (min:sec) with wave/clock icon.
A (< 2 sec) to access ALT 2.
M (< 2 sec) to step back to Main.
10 sec, revert to Main if A or M is not pressed.
S (press) to activate Smartglo
®
Backlight.
FREE DIVE ALT 2, information includes (Fig. 115) -
> Time of Day (hr:min) with AM (or PM) icon if 12 Hour.
> NDC (hr:min) with wave/clock/profile (DTR) icon.
A (< 2 sec) to revert to Main.
M (< 2 sec) to step back to ALT 1.
10 sec, revert to Main if A or M is not pressed.
S (press) to activate Smartglo
®
Backlight.
Fig. 113B - FREE DIVE MAIN
(with CDT)
Fig. 113A - FREE DIVE MAIN
(with EDT, default)
Fig. 115 - FREE DIVE ALT 2
Fig. 114B - FREE DIVE ALT 1
(with EDT)
Fig. 114A - FREE DIVE ALT 1
(CDT, default)
FREE DIVE MODE STRUCTURE


M
S
A
< 2 sec
< 2 sec
Light (Smartglo)
ALTs
at 5 FT (1.5 M) for 5 sec
at 2 FT (0.6 M) for 1 sec


Start/Stop Timer
Reset Timer
2 sec
Interchange
EDT & CDT on
Main & ALT
2 sec
press
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeris A300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeris A300 in the language / languages: English as an attachment in your email.

The manual is 14,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info