618065

Aeris A300 Manual

41
Zoom out
Zoom in
Previous page
1/56
Next page
41
A300/A300 XT OPERATING MANUAL
© 2002 Design, 2012 Doc. No. 12-7255-r01 (5/14/12)
SET ALM (ALARMS) LEAD-IN, information is to include (Fig. 109):
> Graphics Go To and ALM with SET icon.
• S (< 2 sec) to access Set EDT Alarm.
• A (< 2 sec) to step forward to Set UTL Lead-in.
• M (< 2 sec) to step back to Set CDT Lead-in.
• 2 minutes, or M (2 sec), revert to Main.
SET EDT ALARM, information is to include (Fig. 110):
The FREE mode EDT Alarm is factory set for 30 seconds. When set ON, the Alarm will sound every 30 seconds while operating
underwater in FREE Dive Mode.
> Graphic EDT with SET icon.
> Graphic OFF (or ON) flashing with wave/clock (EDT) icon.
• A or M (< 2 sec) to toggle between OFF and ON.
• S (< 2 sec) to save the setting and access Set D1.
• S (2 sec), if the setting is not changed, to revert to Set ALM Lead-in.
• 2 minutes, or M (2 sec), revert to Main.
DEPTH ALARMS
FREE mode features 3 Depth Alarms that can be set at progressively deeper depths. It is programmed to prevent Depth 2 from
being set at values equal or shallower than the setting for Depth 1 and Depth 3 from being set at values equal or shallower than
the setting for Depth 2.
SET DEPTH ALARM 1 (2, 3), information is to include (Fig. 111):
> Graphic D1 (D2, D3) with SET icon.
> Graphic OFF, or ON, flashing, with Depth value last set and FT (or M) icon.
• A (< 2 sec) to step upward through the selections of OFF, ON, and SET.
• M (< 2 sec) to step back through the selections.
• S (< 2 sec) to save the selection and access Set Depth Alarm 2 if OFF or ON is saved, or flash the Depth digits if SET is
saved.
• S (2 sec), if the selection is not changed, to step back to Set EDT Alarm.
• 2 minutes, or M (2 sec), revert to Main.
If SET is saved and the Depth digits are flashing -
• A (hold) to scroll upward through the Set Points from 30 through 330 FT (10 to 100 M) in 10 FT (1 M) increments at 8/
sec.
• A (< 2 sec) to step upward through the Set Point.
• M (< 2 sec) to step back through the Set Points.
• S (< 2 sec) to save the Depth value (solid) and flash the graphic SET, allowing ON or OFF to be selected.
Setting D2 (D3) Alarms are similar with their Set Points beginning 1 increment > the D1 (D2) Alarm setting. If D1 (or D2) is set
OFF, the message SET 1 (or 2) ON FIRST will be displayed flashing for 5 seconds (Fig. 112) when an attempt is made to set D2
(or D3) ON while D1 (or D2) is OFF.
HISTORY - shared with NORM/TECH (see page 20).
ID-SN - same as NORM/TECH (see page 20).
Fig. 109 - SET CDT
Fig. 110 - SET EDT ALARM
Fig. 111 - SET DEPTH
ALARM
Fig. 112 - SET DEPTH
ALARM MESSAGE
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeris A300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeris A300 in the language / languages: English as an attachment in your email.

The manual is 14,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info