618065

Aeris A300 Manual

40
Zoom out
Zoom in
Previous page
1/56
Next page
40
A300/A300 XT OPERATING MANUAL
© 2002 Design, 2012 Doc. No. 12-7255-r01 (5/14/12)
FREE SURF ALT 2, information includes (Fig. 106):
> Time of Day (hr:min) with AM (or PM) icon, no icon if 24 hour format.
> Temperature with °F (or °C) icon.
> Altitude graphic, if L2 (to L7), blank if Sea level.
• A (< 2 sec) to step forward to FLY.
• M (< 2 sec) to step back to ALT 1.
• 10 sec, or M (2 sec), revert to Main.
• S (press) to activate Backlight.
- - - - - - - - - -
Some of the descriptions that follow are shared with NORM/TECH modes,
and are referenced back in those sections.
- - - - - - - - - -
FLY/DESAT - shared with NORM/TECH (see page 11).
FREE SET GROUPS.
Sequence >> Set Lead-in >> Set OP MOD >> Set CDT >> Set ALM >> Set UTL >> Set TME.
> FREE does not access Set Gas (FO2).
SET GROUP LEAD-IN, information includes (similar to Fig. 23):
> Graphics Go To SET.
• S (< 2 sec) to access Set OP MOD Lead-in.
• A (< 2 sec) to step forward to ID-SN.
• M (< 2 sec) to step back to Fly/Desat.
• 2 minutes, or M (2 sec), revert to Main.
SET OP MOD (Mode) - shared with NORM/TECH (see page 13).
SET CDT (Countdown Timer) - separate from NORM/TECH (refer to the following).
SET ALM (Alarms) - separate from NORM/TECH (refer to the following).
SET UTL (Utilities) - shared with NORM/TECH (see page 16); no DS, SS, Algorithm, or CF.
SET TME (Time/Date) - shared with NORM/TECH (see page 18).
SET CDT (COUNTDOWN TIMER) LEAD-IN, information is to include (Fig. 107):
> Graphics Go To and CDT with SET icon.
• S (< 2 sec) to access Set CDT.
• A (< 2 sec) to step forward to Set ALM Lead-in.
• M (< 2 sec) to step back to Set OP MOD Lead-in.
• 2 minutes, or M (2 sec), revert to Main.
SET CDT, information is to include (Fig. 108):
> Graphic CDT with SET icon, solid.
> Graphic OFF; or time value previously set (min:sec) with clock icon, Minute digits flashing.
• A (hold) to scroll upward through Minute Set Points from OFF to 0: to 9: in 1 Minute (1:) increments at 8/sec.
• A (< 2 sec) to step upward through Minute Set Points.
• M (< 2 sec) to step back through Minute Set Points.
• S (< 2 sec) to save the Minute setting and flash the Seconds digits.
• S (2 sec), if the setting is not changed, to revert to Set CDT Lead-in.
• A (hold), while the Seconds digits are flashing, to scroll upward through Set Points from :00 to :59 in 1 Second (:01)
increments at 8/sec.
• A (< 2 sece) to step upward through Second Set Points.
• M (< 2 sec) to step back through Second Set Points.
• S (< 2 sec) to save the CDT setting and revert to Set CDT Lead-in.
• 2 minutes, or M (2 sec), revert to Main.
Fig. 106 - FREE SURF ALT 2
Fig. 107 - SET CDT LEAD-IN
Fig. 108 - SET CDT
… 40 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeris A300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeris A300 in the language / languages: English as an attachment in your email.

The manual is 14,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info