618065

Aeris A300 Manual

15
Zoom out
Zoom in
Previous page
1/56
Next page
15
A300/A300 XT OPERATING MANUAL
© 2002 Design, 2012 Doc. No. 12-7255-r01 (5/14/12)
TECH SET GAS 2 (3 similar), information includes (Fig. 29):
> SET, FO2, Gas (tank) 2 icons.
> CF, Z+ (or DSAT) icons, if they apply.
> Graphic AIR (or OFF*) flashing, or -
. . Max Depth allowed with FT (or M) and MAX icons.
. . FO2 (numeric) value flashing.
Since there are only 2 digits, 100% is displayed as 00.
. . PO2 Alarm value with PO2 icon.
*OFF will prevent that Gas from being displayed as a switch option during dives.
• A (hold) to scroll upward through FO2 settings from OFF (if previously selected) to Air to 21 through 100% in 1% increments
at 8/sec, stopping when the button is released, or at 32, then at 50, then at 80 (even if A is held depressed).
• A (hold) again to resume the scroll upward through 100%, then stop at Air (or 21 if a repetitive Nitrox dive).
• A (< 2 sec) to step upward through the Set Points one at a time.
• M (< 2 sec) to step back through the Set Points one at a time.
• S (2 sec), if the setting is not changed, to step back to Set Gas Lead-in.
• 2 minutes, or M (2 sec), revert to Main.
• S (< 2 sec) to save the setting and flash the PO2 digits if Nitrox, or access Set Gas 3 if Air.
To set PO2, if flashing -
• A (< 2 sec) to step upward through the Set Points of 1.00 to 1.60 one at a time in increments of 0.05.
• M (< 2 sec) to step back through the Set Points one at a time.
• S (< 2 sec) to save the PO2 Alarm setting and access Set Gas 2 (revert to Set Gas Lead-in after Gas 3).
• S (2 sec) to step back to Set Gas Lead-in.
• 2 minutes, or M (2 sec), revert to Main.
NORM/TECH SET ALM (ALARMS)
Unless noted otherwise, Alarm values set in one mode also apply to the other mode. Example: If the Audible is set OFF while in
NORM mode, it can then be set ON while in TECH mode.
SET ALM LEAD-IN, information includes (Fig. 30):
> Graphics Go To and ALM with SET icon.
• S (< 2 sec) to access Set Audible.
• A (< 2 sec) to step forward to Set UTL Lead-in.
• M (< 2 sec) to step back to Set GAS Lead-in.
• 2 minutes, or M (2 sec), revert to Main.
SET AUDIBLE ALARM, information includes (Fig. 31):
This feature is used to disable Audible Alarms and the associated LED, except during Violations. Setting it Off does not effect the
messages or flashing that occurs when an Alarm strikes. It also does not affect FREE Mode Alarms (A300).
> Graphic AUD with SET icon.
> Graphic OFF (or ON) flashing.
• A or M (< 2 sec) to toggle between OFF and ON.
• S (< 2 sec) to save the setting and access Set Depth Alarm.
• S (2 sec), if the Set Point is not changed, to step back to Set ALM Lead-in.
• 2 minutes, or M (2 sec), revert to Main.
SET DEPTH ALARM, information includes (Fig. 32):
This feature is not the same as the Delayed Violation depth alarm, or the FREE depth alarms (A300), described later.
> SET icon.
> Graphic OFF (or ON) flashing, with Depth value last set with FT (or M) and MAX icons solid.
• A (< 2 sec) to step forward through the selections OFF, ON, and SET.
• M (< 2 sec) to step back through the selections.
• S (< 2 sec) to save the selection and access Set EDT Alarm if OFF or ON is saved, or flash the Depth digits if SET is saved.
• S (2 sec), if the selection is not changed, to step back to Set Audible.
• 2 minutes, or M (2 sec), revert to Main.
If SET is saved and the Depth digits are flashing >>
• A (hold) to scroll upward through the Set Points from 30 to 330 FT (10 to 100 M) in 10 FT (1 M) increments at 8/sec.
• A (< 2 sec) to step upward through the Set Points one at a time.
• M (< 2 sec) to step back through the Set Points one at a time.
• S (< 2 sec) to save the Depth value (solid) and flash the graphic SET, allowing ON or OFF to be selected.
• S (2 sec), if the Set Point is not changed, to step back to Set Audible.
• 2 minutes, or M (2 sec), revert to Main.
Fig. 29 - SET GAS 2
(Gas 3 similar)
Fig. 30 - SET ALARMS
LEAD-IN
Fig. 31 - SET AUDIBLE
Fig. 32 - SET DEPTH ALARM
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeris A300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeris A300 in the language / languages: English as an attachment in your email.

The manual is 14,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info