618065

Aeris A300 Manual

13
Zoom out
Zoom in
Previous page
1/56
Next page
13
A300/A300 XT OPERATING MANUAL
© 2002 Design, 2012 Doc. No. 12-7255-r01 (5/14/12)
Log Data 3, information includes (Fig. 21):
> Z+ (or DSAT), CF, DS, NX icons, if they apply.
> Max Depth with FT (or M) and MAX icons.
> Elapsed Dive Time (hr:min) with wave/clock (EDT) icon.
> TLBG with max segment flashing, others fixed up to end of dive accumulation. Blank if GAUG or VGM.
> VARI, max Ascent Rate sustained for 4 sec.
> LOG icon.
• A (< 2 sec) to access that dive's Log Data 4 screen if Nitrox, or revert to Preview if not.
• M (< 2 sec) to step back that dive's Log Data 2 screen.
• S (2 sec) to revert to that dive's Log Preview.
• 2 minutes, or M (2 sec), revert to Main.
Log Data 4 (only if Nitrox), information includes (Fig. 22):
> O2% with icon, at end of dive.
> FO2 value set for Gas in use when dive ended, with FO2 and Gas (tank) icons.
> Max level of PO2 achieved with icon.
> NX and LOG icons.
• A (< 2 sec) to revert to Preview.
• M (< 2 sec) to step back that dive's Log Data 3 screen.
• S (2 sec) to revert to that dive's Log Preview.
• 2 minutes, or M (2 sec), revert to Main.
NORM/TECH SET GROUPS
Sequence >> Set Lead-in > Set OP MOD >> Set GAS >> Set ALM >> Set UTL >> Set TME.
Set OP MOD (Mode) - allows selection of the operating mode to be used.
Set GAS - allows FO2, and PO2 Alarms (TECH only), to be set.
Set ALM (Alarms) - allows dive alarms to be set or turned off.
Set UTL (Utilities) - allows general items to be set or turned off.
Set TME (Time/Date) - allows time, date, and formats to be set.
Set Group Lead-in, information includes (Fig. 23):
> Graphics Go To SET.
• S (< 2 sec) to access Set OP MOD Lead-in.
• A (< 2 sec) to step forward to History.
• M (< 2 sec) to step back to Log Lead-in.
• 2 minutes, or M (2 sec), revert to Main.
SET OP MOD LEAD-IN, information includes (Fig. 24):
> Graphics Go To OP MOD with SET icon.
• S (< 2 sec) to access Set OP, the mode currently active.
• A (< 2 sec) to step forward to Set GAS.
• S (2 sec) to step back to Set Lead-in.
• 2 minutes, or M (2 sec), revert to Main.
Set OP, information includes (Fig. 25):
> Graphic OP with SET icon.
> Graphic NOR (or TEC, GAU, FRE) flashing.
• A (< 2 sec) to step forward through the selections.
• M (< 2 sec) to step back through the selections.
• S (< 2 sec) to save the selection and revert to that mode's Surface Main.
• S (2 sec) to step back to Set OP MOD Lead-in.
• 2 minutes, or M (2 sec), revert to Main.
Fig. 23 - SET GROUP
LEAD-IN
Fig. 21 - LOG DATA 3
Fig. 22 - LOG DATA 4
Fig. 24 - SET OP MODE
LEAD-IN
Fig. 25 - SET OP MODE
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeris A300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeris A300 in the language / languages: English as an attachment in your email.

The manual is 14,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info