618065

Aeris A300 Manual

11
Zoom out
Zoom in
Previous page
1/56
Next page
11
A300/A300 XT OPERATING MANUAL
© 2002 Design, 2012 Doc. No. 12-7255-r01 (5/14/12)
NORM/TECH SURF ALT 3 (only if Nitrox, no screen if Air), information includes (Fig. 11):
> Current O2% saturation with icon.
> Current FO2 set for Gas 1 with FO2, Gas 1, & NX icons.
> Current PO2 alarm value set for Gas 1 with icon, fixed at 1.40 if NORM.
• A (< 2 sec) to step forward to FLY.
• M (< 2 sec) to step back to ALT 2.
• 10 sec, or M (2 sec), revert to Main.
• S (press) to activate Backlight.
- - - - - - - - - -
During the first 10 minutes on the surface after a dive, the ALTs can be accessed, other screens cannot.
- - - - - - - - - -
FLY/DESAT
FLY Time is a count down timer that begins counting down 10 minutes after surfacing from a dive from 23:50 to 0:00 (hr:min).
DESAT Time, also a count down timer, provides calculated time for tissue desaturation at sea level taking into consideration the
Algorithm used and the Conservation Factor setting.
DESAT Time also begins counting down 10 minutes after surfacing from a NORM dive, counting down from 23:50 (max), usually
much less, to 0:00 (hr:min).
When the DESAT time reaches 0:00, which will generally occur prior to the FLY count down reaching 0:00, it will remain on the
display until the FLY count down reaches 0:00.
> Desaturation requiring times greater than 24 hours will display 23: - - .
> In the event that Time to Desaturate still remains at the end of 24 hours, the added time will be zeroed.
> When other screens are accessed, the FLY and DESAT countdowns continue in the background.
Fly/Desat, information includes (Fig. 12):
> Time to Fly countdown (hr:min) with FLY and clock (time) icons, dashes if no dive yet.
> Time to Desaturate countdown (hr:min) with SAT and clock (time) icons, dashes if no dive yet or a Violation dive, blank after
a GAUG dive.
• A (< 2 sec) to step forward to Plan Lead-in.
• M (< 2 sec) to step back to ALT 3 if Nitrox, or to ALT 2 if Air.
• 2 minutes, or M (2 sec), revert to Main.
• S (press) to activate Backlight.
NORM/TECH PLAN MODE
No Deco time Limits (NDLs) and O2 time Limits (OTLs) in Plan Mode are based on the Algorithm selected (DSAT or Z+), the FO2
set for Gas 1, and residual nitrogen (or O2) remaining from previous dives. FO2 set for Gas 2 or 3 (TECH only) are not used for
Plan calculations.
PDPS (Pre Dive Planning Sequence)
Plan screens will sequence through Depths from 30 to 190 FT (9 to 57 M), or the Max Depth that will allow theoretical No Deco
Dive Time of at least 1 minute based upon the previous dive profiles in a series of repetitive dives and taking into account descent
and ascent rates of 60 FPM (18 MPM).
When the Conservative Factor is set On, NDLs are reduced to the values of the next 3,000 foot (915 meter) higher Altitude.
Refer to tables in back.
Plan Lead-in, information includes (Fig. 13, 14):
> Z+ (or DSAT), CF, NX icons, if they apply.
> Graphic PLAN if Air, or -
Max Depth allowed for Gas 1 FO2 setting with FT (or M) and MAX icons if Nitrox.
> Graphic AIR with FO2 and Gas 1 icons, or -
FO2 set for Gas 1 (xx%) with FO2 icon, and PO2 alarm setting (x.xx ATA) with PO2 icon if Nitrox.
> Plan mode icon (wave/clock/profile).
• S (< 2 sec) to access PDPS.
• A (< 2 sec) to forward to Log Lead-in.
• M (< 2 sec) to step back to Fly/Dsat.
• 2 minutes, or M (2 sec), revert to Main.
Fig. 12 - FLY/DESAT
Fig. 13 - PLAN LEAD-IN
(Gas 1 set for Air)
Fig. 11 - NORM/TECH
SURF ALT 3
Fig. 14 - PLAN LEAD-IN
(Gas 1 set for Nitrox)
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeris A300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeris A300 in the language / languages: English as an attachment in your email.

The manual is 14,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info