Manual AEG WSP 300 H (page 33 of 76) (English, German, Dutch, French)

464372

Zoom out

Zoom in

1/76

For the Fitter

Fig. 13

Fig. 12

Fig. 14

2.3.7 Installation of fan compartment and base board

●

Clean out the base of the kitchen heater

before installing the fan compartment (slide-

in module).

●

Set the fan compartment, along with the base

board, back into the heater. Fix the fan

compartment with 2 fixing screws on the

underside of the inside panel (Pos. 4, Fig. 12).

●

Reconnect the fan wires to the switching

plate.

●

Reconnect the room temperature sensor B2

wires to the charge and discharge regulator B1

●

If a Day Acting Element (DAE) has been fitted,

replace the DAE release thermostat F2.1 to the

inside side panel and reconnect the DAE wiring

to the switching plate.

Caution: Make sure that no wiring is damaged or removed or is touching the fan

resistance. Run the wires in such a way that this does not happen.

●

In order to adjust the black base board to the

respective fitted base recess, remove both

pressure screws at the left and right hand

front side of the fan compartment (Pos. 8,

Fig.13).

●

Adjust the base board to the respective base

recess. Re-fix the pressure screws.

Note: The black base board (with insert for air outlet) can also be individually removed from

the heater. This is necessary, for instance, when a day-acting element is to be fitted.

To do this, remove the room temperature sensor B2 connecting wires from the charge

and discharge regulator B1. Remove the pressure screws on the fan compartment and

pull the base board outwards from the heater.

2.3.8 Installation of kitchen unit front and adjusting boards

●

Measure the dimension “H” from the floor to

the recess in the side panel (Fig. 14).

●

Measure the dimension “S” from the floor to

the lower surface of the kitchen unit front

(Pos.9, Fig. 14).

●

Calculate dimension “X” (= H - S).

English

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG WSP 300 H in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG WSP 300 H Manual

Product: