464372
35
Zoom out
Zoom in
Previous page
1/76
Next page
35
For the Fitter
Fig. 18
Fig. 19
Caution: Make sure that the spring clips cannot come into contact with the fan
compensatory resistance. Bend the compensatory resistance into a horizontal
position. Electrical safety!
Replace and fix the operating plate. Place the kitchen unit front in position.
Note: The kitchen unit front can also be fixed with locking screws. Screw holes for these are already
cut into the front cover panel. However, the kitchen unit front panel must be fixed before
the operating panel is replaced.
2.4 Rating Label
The rating label contains technical data specific to the type of appliance. The rating label is found
at the bottom left of the black base board.
Caution: Before replacing the front cover
panel, make sure that the core
temperature sensor B3 (see Fig. 6,
Page 32) is firmly sitting in its
sleeve (sensor tip at end of sleeve).
Position the spring clips (Pos. 18, Fig. 18) from
the rear into the 4 square holes in the front
cover panel. Replace the cover panel onto the
heater and fix with the screws.
English
Charge circuit
Discharge circuit
Day-acting Element
Weight
Type
Fabrication number
Fan
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG WSP 300 H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG WSP 300 H in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info