Manual AEG WSP 1510 S (page 27 of 66) (English, German, Dutch, French)

464367

Zoom out

Zoom in

1/66

English

2.3 Rules and Regulations

• Pay attention to the packing slip!

• The national building and garage regulations must be taken into account.

• The installation area must have a sufficient floor load capacity.

In case of doubt a building surveyor should be consulted (for weights of the storage heaters,

see ”Technical Data”).

• The minimum distance from adjacent object surfaces must be kept (figs. 2 and 2a).

• All electrical connection and installation work must be performed in accordance with the VDE

regulations (0100), the regulations of the electricity supply company responsible and the

pertinent national and regional regulations.

• The device must be disconnectable from the mains at all poles by an supplementary device with a

disconnection distance of at least 3 mm. Contactors, fuses and similar can be connected for this.

• A later increase in the output must be approved separately by the responsible electricity supply

company. Failure to notify the electricity supply company of the increase in the output

constitutes a breach of the electricity supply contract.

• The operating equipment must be designed for the rated consumption of the units.

• The unit’s rating plate must be observed!

The specified voltage must match the rated voltage.

• Unit fastening for meeting the VDE standing safety requirement.

2.4 Installation

The storage heater must be secured by a wall or floor fixture (fig. 8) to meet the VDE standing

safety requirement.

There is a hole in the back wall of the heater through which the heater can be fixed to the wall

with a suitable screw to prevent it from tipping over.

Alternatively the storage heater can be screwed to the floor through 4 holes (∅ 9 mm) in the feet

of the heater or to the consoles when floor consoles are used.

2.4.1 Installation Site

The unit may not

– be operated in rooms where there is a risk of fire or explosion due to chemicals, dust, gases or

fumes;

– be operated in the immediate vicinity of pipes or containers which carry or contain inflammable

or explosive substances;

– be operated when the minimum distances from adjacent object surfaces are not kept.

In rooms in which exhaust fumes, oil and petrol smells occur, the unpleasant smell may linger and

could possibly cause soiling.

Floors

The standing surface of the unit must be level and sufficiently stable so that the housing is not

deformed.

A temperature resistance of the fastening wall of at least 85 °C and of the floor of at least 80 °C

must be ensured. The units can be placed on any conventional floor but changes may occur in the

rail area on PVC, parquet and long pile carpeted floors under the influence of pressure and

temperature. In this case heat-resistant underlay tiles must be used (to be provided on site).

For the Fitter

03 GB WSP_1510S.p65 27.01.2004, 16:3229

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG WSP 1510 S in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG WSP 1510 S Manual

Product: