135583
71
Zoom out
Zoom in
Previous page
1/80
Next page
7 EN
Channel Presetting
Tuning of broadcast channels not already preset in the VCR
can be performed in two ways.
Automatic Channel Preset
By “AUTOMATICALLY” tuning channels and placing
them in sequential order in the VCR’s memory i.e. the first
channel found will be memorized into the VCR’s channel
position 1, the second channel found will be memorized
into the VCR’s channel position 2 and so on.
Execution of the “Automatic” channel presetting cancels all
the preset channels. DO NOT use this feature if you intend
to use some of the pre-tuned channels. Use the “Manual”
channel presetting function to tune in the additional
channels you require.
Manual Channel Preset
Each channel is tuned manually and individually. Follow
the steps laid out in the “Manual Channel Preset” section.
Before you preset Channel...
It is necessary to set the video channel if your VCR is
connected to the TV via the coaxial cable, and TV channel
36 is set for broadcasting, or interference lines appear on
the picture. Please refer to “Video Channel Setting”.
Automatic Channel Preset
You can programme the tuner to scan only the channels that
you can receive in your area.
Use the remote control for this procedure.
1) Turn on the TV and select the TV channel to the video
channel on the TV.
2) Press
MENU.
3) Press
PLAY/o or STOP/L to select “INITIAL”, then press
F.FWD/B.
4) Press
PLAY/o or STOP/L to select “CH TUNING”, then
press
F.FWD/B.
5) Press
PLAY/o or STOP/L to select “AUTO”, then press
F.FWD/B.
The tuner scans and memorizes all the active channels in
your area. After scanning, the tuner stops on the lowest
memorized channel.
To Select a Desired Channel
You can select a desired channel by using CHANNEL (o/p), or
directly pressing the
number buttons on the remote control.
Enter a channel number as a two-digit number for the
quickest results. For example, to select channel 6, press 0
and
6. If you only press 6, channel 6 will be selected after a
brief delay.
You can only select channels 1–99.
Manual Channel Preset
Use the remote control for this procedure.
1) Press
MENU.
2) Press
PLAY/o or STOP/L to select “INITIAL”, then press
F.FWD/B.
3) Press
PLAY/o or STOP/L to select “CH TUNING”, then
press
F.FWD/B.
4) Press
PLAY/o or STOP/L to select “MANUAL”, then
press
F.FWD/B.
5) Press
PLAY/o or STOP/L to select “POSITION”, then
press
F.FWD/B.
When a weak signal is received in Manual Tuning mode,
you can change the background to solid blue or the
static screen by pressing
TAPE COUNTER RESET.
6) Press the
number buttons, PLAY/o, or STOP/L to select
your desired position number, then press
F.FWD/B.
You can select position number 01-99.
If [ON] appears on the right side of “SKIP”, press
PLAY/o or STOP/L to point to “SKIP”. Then, press
F.FWD /B to select [OFF].
If you want to remove scrambled signals, press
PLAY/o or STOP/L repeatedly to point to
“DECODER”. Then, press
F.FWD/B to select [ON].
7) Press
PLAY/o or STOP/L to select “CHANNEL”, then
press
F.FWD/B.
Press
PLAY/o or STOP/L. The VCR tuner will begin to
search up or down automatically. When a channel is
found, the VCR will stop searching and the picture will
appear on the TV Screen.
You can select desired channel number by using
the
number buttons. You must refer to the following
Channel Plan table and press three digits to select the
channel number.
(To select channel 24, press “
0” button first and then
press “
2” and “4”.)
If this is the channel you want, press
F.FWD/B.
This VCR can receive Hyper and Oscar frequency bands.
8) Press
MENU to exit.
INITIAL
CH TUNING
CLOCK
RF OUT
LANGUAGE
CH TUNING
AUTO
MANUAL
MOVE
scanning
MENU
TIMER
SET UP
INITIAL
Channel Plan
CH Indication TV Channel
02 – 12 E2 – E12
13 – 20 A – H (only ITALY)
21 – 69 E21 – E69
74 – 78 X, Y, Z, Z+1, Z+2
80 – 99,100 S1 – S20,GAP
121 – 141 S21 – S41
HG462ED(EN).fm Page 7 Wednesday, March 3, 2004 7:49 PM
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG vcr 4500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG vcr 4500 in the language / languages: German as an attachment in your email.

The manual is 4,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info