135583
73
Zoom out
Zoom in
Previous page
1/80
Next page
9 EN
Basic Operation
Playback
Tracking Adjustment
Tracking adjustment will be activated automatically
(Digital Tracking function) when you start playback.
When playing pre-recorded tapes or tapes recorded on units
other than your own, noise lines (black and white streaks)
may appear on the playback picture. If this occurs, you can
adjust the tracking control manually by pressing
CHANNEL (o/p) until the streaks disappear. To return to
the DTR function, stop the tape once and start playback
again.
You can reduce the noise lines by pressing
CHANNEL (o/p)
in Slow mode, too. Slow tracking adjustment is not set
automatically.
In the Still mode, press
SLOW, and press CHANNEL (o/p)
until the streaks disappear. To return to the Still mode,
press PAUSE/STILL again.
1) Turn on the TV and select the video channel on the TV.
2) Insert a prerecorded tape.
The VCR will turn on automatically. If the erase-
protection tab has been removed, the VCR will start
playback automatically.
3) Press PLAY/o to begin playback.
Tracking adjustment will be activated automatically
(Digital Tracking function) when you start playback. To
adjust the tracking manually, press
CHANNEL (o/p).
<If a tape is already in the VCR...>
Using the buttons on the VCR
Just press
PLAY on the VCR. Power will automatically
turn on and playback will start. (Direct Button
Operation)
Using the buttons on the remote control
Press
FUNCTION to turn on, and then press PLAY/o.
4) Press
STOP/L to stop playback.
Speed Search
1) Press F.FWD/B or REW/s during playback to view a
videotape at a high speed in either a forward or reverse
direction. In this mode, the sound will be muted.
2) Press the button again, the VCR will now search in super
high speed. (This function will not operate for a NTSC
tape.)
3) Press
PLAY/o to return to normal playback.
Still Picture
Press PAUSE/STILL during playback to view a still picture on
the TV screen.
When the picture begins to vibrate vertically, stabilize the
picture by pressing
CHANNEL (o/p) in the Still mode.
After the VCR has been in Still mode for 5 minutes, it will
stop automatically to protect the tape and the video head.
<Note for “Speed Search” and “Still Picture”>
Usually there will be video noise” lines (black and white
streaks or dots) on the screen. This is normal.
The still picture will, in addition to containing the “noise”
lines, be black and white.
This is not a fault of the machine but merely a by-product
of the technology involved in producing a VCR with
LP mode.
Slow Motion
•Press SLOW to reduce the playback speed. The VCR mutes
the sound during slow motion. You can control the speed
by pressing F. FWD/B (faster) or REW/s (slower). Press
PLAY/o to return to normal playback.
If it is left in the Slow mode for more than five minutes, the
VCR will automatically switch to the Stop mode.
Recording
Viewing and Recording the Same Programme
1) Insert a cassette tape with its erase-prevention tab in place.
(If necessary, rewind or fast forward the tape to the point
at which you want to begin recording.)
2) Press the
number buttons or CHANNEL (o/p) to select
the channel to be recorded.
3) Press SPEED/SYSTEM to select the tape speed (SP/LP).
4) Press
REC/OTR to begin recording.
•The REC indicator on the display comes on.
5) Press STOP/L when recording is completed.
Skipping Unwanted Programme Material During
Recording
1) Press PAUSE/STILL when you want to temporarily halt
recording.
You can check the remaining pause time with
C
marks on
the TV screen. Each
C
mark represents 1 minute. After 5
minutes, the VCR will automatically switch to the Stop
mode to prevent tape damage.
2) Press
PAUSE/STILL or REC/OTR to resume recording.
Recording One Programme While Viewing Another
You can record one programme while viewing another. To
start recording, follow steps
1) to 4) under “Viewing and
Recording the Same Programme”. Then, set the TV to the
channel you want to watch.
To Monitor the Progress of Your Recording
Select the video channel on the TV.
Assemble Function
You can record in continuation from previous programme
on a pre-recorded tape.
1) Insert a pre-recorded tape. Press
PLAY/o to start
playback.
2) Press
PAUSE/STILL at the desired point on the tape.
3) Press
REC/OTR. The VCR will be in the Recording Pause
mode.
4) Press
CHANNEL (o/p) to select the channel to be
recorded.
5) Press
REC/OTR or PAUSE/STILL. The recording will
begin.
6) Press STOP/L when recording is completed.
HG462ED(EN).fm Page 9 Wednesday, March 3, 2004 7:49 PM
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG vcr 4500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG vcr 4500 in the language / languages: German as an attachment in your email.

The manual is 4,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info