135583
69
Zoom out
Zoom in
Previous page
1/80
Next page
5 EN
Other Connections
Euro Scart (AV) Sockets
Your VCR is provided with two Scart sockets which you may
connect to other external devices with Scart sockets. We
recommend this connection to ensure a better audio and
picture quality.
Euro Scart cables are obtainable at your dealer.
AV1 (TV) Connection to TV
If your TV has Scart sockets, you may connect your VCR’s
AV1 (TV) scart socket to the Scart socket on the back of your
TV. Please see the instruction manual for your TV.
Note: You may connect the VCR to your audio amplifier.
1) Prepare an audio cable (not supplied).
2) Switch off your audio amplifier.
3) Insert one end of the audio cable into the corresponding
red and white AUDIO OUTPUT L/R socket at the back
of the video recorder and the other end into the
corresponding audio input socket at the audio amplifier.
AV2 (DECODER) Connection for Other External Devices
The second Scart socket AV2 (DECODER) is designated for
other external devices, e.g. decoder, another VCR, video
camera and so on.
Note: If you want to connect a TV with Scart socket to your
VCR, the TV must be connected to the VCR through
AV1 (TV). A connection to AV2 (DECODER) will not
function correctly.
AV Front Terminals
When you copy a video tape, or watch a programme recorded
on an another source, use the AUDIO/VIDEO input jacks on
the front panel of the VCR.
Note: When you connect a monaural VCR (another source)
to this VCR, connect the audio output jack of the
monaural VCR (another source) to the AUDIO L jack
of this VCR. The audio signal will be recorded in both
L and R channel equally.
External Input Mode
To receive the signal from an external source (decoder, video
camera, another VCR, etc.), connect the source to the AV2
(DECODER) socket, and press
CHANNEL (o/p) or enter
“002” with the
number buttons. “AV2” appears on the TV
screen. If you use the AV1 (TV) socket, press
CHANNEL (o/p) or enter “001” with the number buttons.
“AV1” appears on the TV screen.
If you use the front AUDIO/VIDEO input jacks, press
CHANNEL (o/p) or enter “003” with the number buttons.
“AV3” appears on the TV screen.
Initial Settings
Selecting the Language
The following steps should only be performed if there is a
power failure or if the VCR is unplugged for more than 30
seconds.
Use the remote control for this procedure.
1) Turn on the TV and select the video channel on the TV.
2) Press
FUNCTION.
3) Press
PLAY/o or STOP/L repeatedly to select your desired
language.
4) Press
MENU.
Changing the Language
If you want to change the language used on the TV screen
menus, follow the steps below.
Use the remote control for this procedure.
1) Press
MENU.
2) Press
PLAY/o or STOP/L to select “INITIAL”, then press
F.FWD/B.
3) Press
PLAY/o or STOP/L to select “LANGUAGE”, then
press
F.FWD/B.
4) Press
PLAY/o or STOP/L repeatedly to select your desired
language.
AV2 (DECODER) AV1 (TV)
AUDIO
OUTPUT
AERIAL
RF OUT
R
L
AV1 (TV)
to 21-Pin
to 21-Pin Scart Jack
Decoder (Not supplied)
(TV)
to RF OUT
to aerial
socket
Scart Jack
[Back of the VCR]
L
R
AUDIO
OUTPUT
VIDEO L AUDIO R
[Front of the VCR]
etc.
To the audio
output jack
[Another source]
To the video
output jack
Audio/Video
cables
(not supplied)
LANGUAGE
DEUTSCH
ITALIANO
ESPAÑOL
NEDERLANDS
FRANÇAIS
SVENSKA
ENGLISH
[ ]
HG462ED(EN).fm Page 5 Wednesday, March 3, 2004 7:49 PM
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG vcr 4500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG vcr 4500 in the language / languages: German as an attachment in your email.

The manual is 4,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info