382748
4
Zoom out
Zoom in
Previous page
1/64
Next page
3
ENGLISH
STEP 570 X, STEP 600 X
The base plate can be tilted or moved backward or forward.
Setting an angle
For angle cuts and bevels.
Loosen the fixing screw, pull the base plate out of the mounting, set it at the
required angle (15
o
, 30
o
, 45
o
), push it back into the mounting and tighten the fixing
screw again. Angles other than 45
o
can be set by not pushing the base plate back
into the mounting.
The angle can be read off the scale.
For very exact angle cuts it is
recommended to make a test cut.
Moving the base plate
For plunge
cuts or cuts in corners.
Loosen the fixing screw, push the base
plate to the rear and tighten the fixing
screw again. The base plate in this
position is fixed at the 0
o
setting.
Moving back For cutting a hole with a
short saw blade and sawing near the
edge.
Take the fixing screw out, push the base
plate to the rear and screw the fixing screw tightly into the rear hole.
In this position the base plate can also be off-set in longitudinal direction.
Only operate the machine with suitable
sawdust removal.
The integrated suction channel has the
standardized internal diameter of 30 mm.
Use the suction hose (Id. No.
4932 3304 12) from our range of
accessories to connect it to a household
vacuum cleaner or to an wet-and-dry
vacuum cleaner.
1. Push in and turn the suction hose into the suction
channel until it fits firmly.
2. Push the transparent cover downwards to ensure
optimum sawdust removal.
The anti-splintering device almost entirely
prevents the edge of the wood from
splintering.
Place the anti-splintering device as shown
in the illustration with the smooth side
downwards and flush with the base plate
(this is only possible with the base plate in
the forward position).
The stroke-rate (= movements per minute
of the saw blade) can be infinitely varied
by means of the adjustment wheel.
The letters A to G are printed on the speed
control, meaning:
A = lowest stroke rate
G = highest stroke rate
Adjusting the
base plate
Sawdust removal
Antisplintering
device
Adjusting the
stroke rate
2
74315
0
15
0
III
II
B
A
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG step 570 x at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG step 570 x in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info