574019

AEG LA 10 - 97180 Manual

24
Zoom out
Zoom in
Previous page
1/80
Next page
▪ Using a pair of flat-nose pliers carefully pull the
flat fuse inside the housing unit for the controls.
▪ Replace the defective fuse with a new 15 A flat
fuse by carefully pushing the new fuse into the
fuse holder with your thumb until it is flush with
the unit housing (see Image 9).
Image 9
Intact flat fuse
15 A (Ampere)
Fuse
▪ Unscrew the retaining screw.
▪ Remove the terminal cap and the 15 A
(Ampere) round fuse.
▪ Assemble all parts with the new 15 A fuse in the
order shown and replace the retaining screw
(see Image 8).
Image 8
12 V vehicle
connector plug
Terminal cap
Round fuse 15 A (Ampere)
Retaining screw
12 V Vehicle plug
4.6 Replacing fuses
▪ The unit's 12 V vehicle jack is now live and the
connected 12 V external device can be oper-
ated (see Image 7).
▪ After using the external device unplug the 12 V
vehicle plug from the 12 V vehicle jack on the
unit.
Image 7
External device
12 V vehicle
plug
▪ Remove the cover from the 12 V vehicle jack.
▪ Connect the 12 V vehicle plug of the external
device to the unit's 12 V vehicle jack.
▪ Set the operating switch to ( I ).
4.5 Using the 12 V vehicle outlet
Note! Do not operate the compressor or
the light whilst charging!
▪ Connect the small round plug on the charging
mains adapter to the receptacle .
▪ Plug the charging mains adapter into a 230 V
power socket.
▪ Set the operating switch to ( I ). The unit will
now switch to charging mode.
▪ The LED display will light up and the blinking
LED will indicate the current storage battery
capacity. The charging time is approx. 10 - 12
hours. The green LED must stay on when the
storage battery is fully charged.
▪ After charging use the operating switch to
power the unit off and disconnect the 230 V
charging mains adapter from the unit and the
230 V outlet.
The storage battery should be fully charged prior
to first use.
Charging by 230 V charging mains adapter
4.4 Charging the storage battery
10
14
13
20
13
24
13
16
97180_Luft-Energiestation_LA_10_Manual _01_08_2012_print
Mittwoch, 1. August 2012 12:30:07
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG LA 10 - 97180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG LA 10 - 97180 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 3,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info