574019
22
Zoom out
Zoom in
Previous page
1/80
Next page
No valve adapter required to inflate car tyres.
First remove the cap from the tyre valve.
Open the quick disconnect and attach the
automotive valve plug as far as possible onto the
tyre valve. Close the valve quick disconnect
when doing so.
Verify the automotive valve lever plug is firmly
attached to the tyre valve by carefully pulling on
it.
Do not operate the compressor for more
than 10 minutes. After this time allow the
unit to cool down for 10 minutes!
Automotive, motorcycle- and bicycle tyres with
automotive valve (Schrader valve with 7.7 mm
thread diameter) can be inflated without adapter!
Select the appropriate valve adapter (e.g. ).
Open the valve quick disconnect by pressing
the quick disconnect lever away from the com-
pressed air hose . Now attach the valve
adapter and press the lever toward the com-
pressed air hose to close it (see Image 5).
Check the unit and compressed air hose for
damage before every use! Do not operate dam-
aged units! Review the manufacturer instructions
for the item to be inflated before every use.
Attention! Always wear suitable ear
protectors and safety goggles during
operation!
The unit can be operated with the built-in storage
battery or the built-in 12 V vehicle plug.
4.3 Operating the compressor
Set the On / Off switch to ( I ). The unit is
now operational.
To turn the lighting on set the lighting On / Off
switch to ( I ).
To turn the LED lights off set the light
switch to ( O ).
To power the unit off set the On / Off
switch to ( O ).
4.2 Operating the lighting
Automatic start warning! If the
On / Off switch for compressor
power is set to ( I ) before switching the
unit on, the compressor will automatically start
and compressed air will be supplied to the com-
pressed air hose. Risk of property damage
and personal injury!
Set the On / Off switch to ( I ). The unit is
now operational and the manometer lighting
is activated. The LED lights indicate the
current capacity of the storage battery.
In operational mode the 12 V vehicle outlet
is powered.
To switch the unit off set the On / Off switch
to ( O ).
4.1 Powering the unit On / Off
4.0 OPERATION /
ACCESSORIES
Image 5
13
1
20
16
19
13
15
13
13
3
7
4
4
3
22
3
4
7
97180_Luft-Energiestation_LA_10_Manual _01_08_2012_print
Mittwoch, 1. August 2012 12:30:07
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG LA 10 - 97180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG LA 10 - 97180 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 3,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info