562330
8
Zoom out
Zoom in
Previous page
1/60
Next page
8
www.aeg.com
If the appliance or the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualied person, in order to
avoid hazard.
Always place the appliance on a at, level surface.
Always disconnect the appliance from the supply if it is left unattended and
before assembling, disassembling or cleaning.
Appliance is for indoor use only.
Do not immerse the appliance, cord or plug in water or any other liquid.
Do not let cord hang over edge of table or counter, do not let cord contact
hot surface, including the stove.
Never use accessories or parts made by other manufactures not
recommended or sold; may cause a risk of injury to persons.
Make sure the motor has completely stopped before disassembling and
cleaning.
Avoid contact with moving parts. Contact could result in injury! Do not use
other tools or utensils during the appliance usage.
Do not leave this product out of your sight when it is running.
Ensure all loose matters and your clothes/accessories are kept away while
using this product.
Never process boiling liquids (max 90°C).
Do not use this appliance to stir paint. Danger, could result in an explosion!
Never operate appliance with the attachments wire whip, at beater or
dough hook unless the bowl is in place.
This appliance is intended for domestic use only. The manufacturer cannot
accept any liability for possible damage caused by improper or incorrect
use.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
The motor slows down
during operation.
Amount of dough may exceed maximum
capacity.
Remove half and process in two batches.
Dough may be too wet, it sticks onto the side
of the bowl..
Add more our, 1 tablespoon at a time
until the motor speeds up. Process until
dough cleans the side of the bowl.
The motor does not work. The appliance is not connected to the mains. Make sure to plug in the appliance
before operation.
The appliance vibrates/
moves during operation.
The rubber feet are wet. Make sure the rubber feet at the bottom
of the unit are clean and dry.
It is normal for heavy loads (e.g heavy dough,
cheese).
Remove half and process in two batches.
The attachment scrapes
the Stainless steel bowl
during operation.
The height of the attachment shaft is incorrect. Adjust the height of the attachment
shaft.
KM4xxx_StandMixer_AEG NO-FARSI.indd 8 2017-07-06 13:02:06
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG KM4700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG KM4700 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG KM4700

AEG KM4700 User Manual - English, German, Dutch, French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info