562330
6
Zoom out
Zoom in
Previous page
1/60
Next page
6
www.aeg.com
ENGLISH
Thank you for choosing an AEG product. In order to ensure the best results, always use original AEG accessories and
spare parts. They have been designed especially for your product. This product is designed with the environment in
mind. All plastic parts are marked for recycling purposes.
ACCESSORIES INFORMATION
The Meat Grinder and Express Slicer accessories are only included in the model KM4700. Other models from the
KM4xxx series can be used with these accessories, but they need to be bought separately.
COMPONENTS
A. Motor head (tiltable)
B. Speed selector
C. Housing
D. Tilt head locking lever
E. Working light
F. Attachment hub
G. Attachment shaft
H. Stainless steel bowl
I. Bowl clamping plate
J. Non-slip feet
K. Power cord
L. Wire whip
M. Coated at beater
N. Coated dough hook
O. Meat grinder*
P. Slicer/Shredder*
*depending on model
Picture page 2-3
GETTING STARTED
1 Before using the appliance for the rst time: Unplug the appliance. The Wire whip, Meat grinder* and Slicer/Shred-
der* should only be washed by hand in warm soapy water.The bowl, Flat beater and Dough hook are dishwasher-
proof. Clean the motor unit with a damp cloth. Caution: Never immerse the motor unit in water! Let all parts dry
thoroughly.
2 Place the appliance on a at surface. Tilting the Motor head up: Move the Tilt head locking lever to “Unlocked” with
one hand, tilt the Motor head up with the other hand. Once in up position it locks. Warning: Keep ngers and hands
away from areas with movable parts.
3 Move Speed selector to “OFF”. Place the Stainless steel bowl on the bowl clamping plate. Move the bowl clockwise
to lock into position. Warning: Never operate appliance with the attachments wire whip, at beater or dough hook
unless the bowl is in place.
4 Place an attachment on the Attachment shaft: Align the slot at the top of the attachment with the pin on the
Attachment shaft. Push attachment up and turn it counterclockwise until the pin is locked into position. To remove
attachment, move it clockwise and pull o.
5 Tilting the Motor head down: Move the Tilt head locking lever to “Unlocked” with one hand, tilt the Motor head
down with the other hand. Insert the plug in the main socket.
6 Move the Speed selector from “OFF” to desired speed (1-10). Once mixing is complete, turn the Speed selector to
“OFF” and unplug the appliance.
7 Work light and Power indicator light: If the appliance is plugged in and a speed is selected, a blue LED lights up
around the Speed selector. A work light will also light up over the working area. If the Speed selector is moved to
“OFF”, the working light will automatically shut o after 3 min.
8 Note: If the Speed selector is already turned on before the appliance is plugged in, both the blue Speed selector LED
light and the Work light will ash OFF and ON to let you know the Speed selector has been left on. Turn the Speed
selector to “OFF” and the lights will stop ashing. Then resume operating normally.
OTHER FUNCTIONS
9 Attachment hub: The appliance comes with a built in multipurpose Attachment hub. Read and carefully follow the
instructions that comes with each attachment for correct and safe use.
10 Adjusting the Attachment shaft: The appliance is adjusted at the factory so that the Flat Beater clears the bottom
of the Bowl. If the Flat Beater hits the bottom of the Bowl or is too far away from the sides, you can adjust it correctly.
See 11 for further instructions.
KM4xxx_StandMixer_AEG NO-FARSI.indd 6 2017-07-06 13:02:06
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG KM4700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG KM4700 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG KM4700

AEG KM4700 User Manual - English, German, Dutch, French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info