648419
15
Zoom out
Zoom in
Previous page
1/48
Next page
15
Installation - for contractors
9.2 Installing the wall mounting bracket
!
Material losses
Observe the necessary oor clearance.
26_07_31_0064
KLE 502 KLE 1002
A mm 210 654
Note
Use appropriate xing materials.
» Unhook the wall mounting bracket from the
appliance.
» Use the holes in the mounting bracket as a template
for drilling the wall.
» Mark out the holes for the wall mounting bracket.
» Drill the holes and insert rawl plugs.
» Screw the wall mounting bracket to the installation
wall.
9.3 Appliance installation
26_07_31_0061
» Hook the lower slots on the back of the appliance
onto the tabs of the wall mounting bracket.
CLIC
26_07_31_0062
» Tilt the appliance back against the upper tabs.
» Secure the appliance by pushing it towards the wall
until it audibly snaps into place on the wall mounting
bracket.
9.4 Removing the appliance
» To release the appliance, push the metal tabs at the
top of the mounting bracket towards the wall.
9.5 Power supply
WARNING Electrocution
In rooms with high moisture levels, such as shower
rooms and kitchens, install the connection socket
at least 25 cm above the oor.
WARNING Electrocution
Ensure that the power cable is not in contact with
any appliance components.
!
Material losses
Ensure the appliance can be separated from the
power supply by an isolator that disconnects all
poles with at least 3 mm contact separation.
!
Material losses
Observe the type plate. The specied voltage must
match the mains voltage.
Note
Ensure that the cross-section of the on-site supply
cable is adequate.
Note
Ensure that a ush-mounted junction box for a per-
manent power supply is installed at a distance of at
least 10 cm from the side of the appliance.
Note
Carry out all electrical connection and installation
work in accordance with relevant regulations.
The appliance is supplied without a plug and has a 3-core
power cable.
» Connect the 3-core power cable to a connection
socket as illustrated:
1
2
1
2
3 3
26_07_31_0175
1 Neutral wire (blue)
2 Live (brown)
3 Control cable (black)
9.5.1 Control cable
!
Material losses
If operating the appliance in programmed mode
using the control cable, observe the correct polarity.
!
Material losses
When not in use, isolate the control cable in order
to prevent a short circuit.
There are 3 possible ways to connect the appliance:
Appliance connected without control cable
The control cable is not connected. The appliance is not
controlled.
» Isolate the control cable.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG KLE 502 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG KLE 502 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 8,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info