517498
28
Zoom out
Zoom in
Previous page
1/34
Next page
15. TROUBLESHOOTING
15.1 ALWAYS check that:
tYou have followed all the steps listed in the user guide to install and set up your telephone.
tAll connectors are securely inserted into their sockets.
tMains power for the base unit is switched on at the socket.
tThe handset’s batteries are correctly and securely installed and are sufficiently charged.
15.2 Everyday use
“I cannot make or answer calls”
tIf the handset’s display is blank, it may have been switched off. Press and hold
on the Handset to
switch it back on.
tCheck that the base unit’s mains power adapter is plugged in and power is switched on. The base unit
needs mains power for normal operation of the phone – not just for charging the handset batteries.
tMake sure that you are using the telephone line cable supplied with your phone. Other telephone line
cables might not work.
tMove the handset closer to the base unit.
tCheck the Battery Level symbol on the display. If it is low, put the handset back on the base unit or
charging pod to recharge the batteries.
t Switch off the power at the mains socket, wait for a short while and then switch it back on. This may solve
the problem.
“I cannot make calls”
tIf the handset display shows KEYS LOCKED, press and hold * to unlock it before you make a call.
tOnly one handset (or the base unit) can be connected to an external line at a time. If the handset display
shows, the base is already being used by either the answering machine or another handset.
“When I press on the keys, nothing happens”
tMake sure that the batteries are fitted in your handset. If the Battery Level symbol on the display shows
‘low’, put your handset back on the base unit or charging pod to charge.
“When I key in a number, it appears on the display, but I cannot make an external call”
tTry a different position for the base unit – somewhere higher if possible, or further away from other
electrical equipment.
“The phone does not ring”
tCheck that the base unit’s mains power adapter is plugged in and power is switched on.
tThe base unit needs mains power for normal operation of the phone – not just for charging the batteries.
tMake sure that you are using the telephone line cable that was supplied with your phone.
tMake sure that the ringer volume settings are not set to off. Increase the ringer volume settings.
“My call was cut off when I went out of range. Now I can’t use my handset.”
tMove the handset closer to the base unit before you try to make a call again.
“There is interference and noise on the line”
tMove the handset closer to the base unit, or to a different position.
tTry moving the base unit away from other electrical equipment, such as a television or a computer.
tYou’ll get the best reception if you place the base unit as high as possible. For example, in a two-floor
building, the first-floor landing is an ideal place.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG ECLIPSE 15 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG ECLIPSE 15 in the language / languages: English as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG ECLIPSE 15

AEG ECLIPSE 15 Quick start guide - English, German - 144 pages

AEG ECLIPSE 15 User Manual - German - 36 pages

AEG ECLIPSE 15 Quick start guide - Dutch, Danish, French - 144 pages

AEG ECLIPSE 15 User Manual - French - 34 pages

AEG ECLIPSE 15 Quick start guide - Italian, Polish, Swedish - 144 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info