English
50
Password Setup Page Parental Control
Some DVD contain information concerning the target group. This
method is comparable with the rating of cinema lms (“Suitable only for
persons of 12 years and over“ e.g.).
If you have the child lock option activated a probably existing corre-
sponding information is read from the DVD and compared with the
value pre-set by you. If a DVD is intended for an older age group than
the one pre-set by you, the DVD cannot be played. The following child
lock options are available:
Kid Safe: Suitable for children.
G: Suitable for all age groups.
PG: The presence of parents is recommended. Some scenes may be
unsuitable for children.
PG 13: The presence of parents is strictly recommended. Some scenes
may be unsuitable for children under the age of 13.
PGR: The presence of parents is strictly necessary.
R: Young persons under the age of 17 may only view this lm in the
presence of an adult.
NC17: Children and juveniles under the age of 17 are not allowed to
watch this lm.
Adult: The lm must only be watched by adults.
In order to activate the individual parental control options, please proceed
as follows:
1. In the “Parental Control” line press the ENTER key (Fig. 3/14). A
window appears for entering the current password.
2. Enter the current password with the Numeric buttons and conrm
with the ENTER key. The master password is “8888“.
3. Press the ENTER key again (Fig. 3/14).
4. Now select the desired option and conrm with the ENTER key (Fig.
3/14).
Setting a Password
If you want to operate the DVD-Player with a child lock system, you
must rst enter a password. This password safeguards the settings for
the child lock system, so that it can only be changed by yourself.
In this menu you can change the password for the child lock system.
In order to change the password, you must rst enter the current pass-
word. The master password is “8888“.
HINWEIS:
If you forgot your password, you can deactivate the child lock system
with this Master password.
Proceed as follows to change the password:
1. In the “Set Password“ line press the ENTER key (Fig. 3/14). A window
appears for entering the current password.
2. Enter the current password in the “Conrm Password” line with the
Numeric buttons (Fig. 3/30) on the remote control.