480507

AEG DVD 4550 Manual

52
Zoom out
Zoom in
Previous page
1/58
Next page
English
52
Troubleshooting
Before sending the machine to the Customer Services, use the following table to check whether you can rectify the
fault yourself.
Fault Possible cause Solution
No display
No power supply
WARNING:
Before troubleshooting, switch the player o.
Put the mains plug in correctly, if necessary, check the
socket is working with another appliance.
no power supply/ mains
switch switched o
Switch the player on by the mains switch (Fig. 1/2).
No image displayed
on screen
Video cable not correctly
connected
WARNING:
Before troubleshooting, switch the player o.
Check the correct t of the Video cable ï “Connecting
the Video cable“. Make sure that the jacks are tightly
in the sockets.
no DVD/CD inserted Insert a CD/DVD.
DVD/CD not compatible
Use only compatible media (see ï “Technical data“).
DVD/CD incorrectly placed in
CD/DVD-tray
Turn the CD/DVD around.
CD/DVD is dirty Clean the CD/DVD around.
CD/DVD is damaged Use a dierent CD/DVD.
Incorrect settings Check the settings of your DVD-Player.
The child lock system is
activated
Deactivate the child lock. ï “Parental control“
The wrong TV mode has been
selected.
Press the VIDEO (Fig. 3/26) button in stop mode in
order to change to TV mode.
No response when
pressing button
Power supply problem or
static charging of appliance
Switch o the main switch and pull out the mains
plug. Insert the mains plug into the socket and switch
the player on again.
No sound Audio cable not connected
WARNING:
Before troubleshooting, switch the player o.
Video plug for transmission of the Video signal, you
must use and Audio cable in addition to the Video
cable ï “Connecting the Audio cable“.
Amplier switched o If you use an amplier for Audio output: check
whether the amplier is switched on.
Incorrect settings Check the settings of your DVD-Player.
NOTE:
When connecting via HDMI, select the digital output
PCM in the audio menu.
The remote control
does not work
wrong direction The remote control is not pointed towards the DVD-
Player.
too far away Make sure that the remote control is not further than
5 m away from the player.
Batteries empty Replace the batteries in the remote control
ï “Remote control battery installation“.
DVD cannot be
played
DVD has not been nalized Use a nalized DVD.
Unit in USB Mode Press the DVD/USB button in Stop mode (Fig. 3/16) to
switch to CD/DVD mode.
… 52 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG DVD 4550 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG DVD 4550 in the language / languages: English, German as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info