474117
57
Zoom out
Zoom in
Previous page
1/72
Next page
57
ENGLISH
5. Connect External Devices
Your TV set features a variety of connectors for dierent devices (e.g. DVD recorder, PC, camera and set top box).
IMPORTANT! Ensure that your TV set and all devices to be connected are turned o before connection. Observe the user
manuals of devices to be connected.
SCART Connector
Good quality analogue image and sound signals are transmitted via the SCART connector on the left hand side of the
device. Connect here devices such as VCR, satellite receiver, game console or Pay-TV decoder.
Connect the Scart adapter cable to the SCART connector on the TV set.
Connect the device via the full-featured SCART cable with the Scart adapter cable jack.
In the source menu (press
SOURCE
button) select SCART.
VIDEO Connectors
You can connect e.g. a video camera via the RCA jacks L and R and the AV jack on the back of the unit.
Connect the device via RCA cable to AV, L and R.
IMPORTANT! Observe the colour coding of the cables when using AV cable (video = yellow, audio L = white and audio R = red).
Select signal input AV in the source menu (press
SOURCE
button).
PC Connector
Use a VGA cable to connect the monitor connector of the PC with the VGA connector on the TV set.
Use an audio cable to connect the audio connector of the PC with PC AUDIO on the TV set.
In the source menu (press
SOURCE
button) select PC.
Component Connector
The component connector Y Pb Pr transmits analogue image signals of external devices, e.g. AV receiver or DVD recorder
in very good quality.
Use a component cable (purchase separately at your dealer) with 3 RCA connectors to connect component output of
the external device with the inputs Y Pb Pr on the TV set.
Use an audio cable to connect the audio output of the external device with the audio connectors AUDIO L and R on
the TV set.
In the source menu (press
SOURCE
button) select YPbPr.
HDMI- Input
Digital video and audio signals from an external device are transmitted in high quality via the HDMI ports.
Use an HDMI cable (not supplied) to connect the HDMI output of the external device with the HDMI input on the TV
set.
Select signal input HDMI1 resp. HDMI2 in the source menu (press
SOURCE
button).
6. Basic Operation
All settings can be performed comfortably with the remote control and the OSD menu. The basic functions can also be
performed with the buttons on the TV set. In this user manual we generally describe operation with remote control.
6.1 Turn TV Set On/O
In standby mode (status indicator red) press the
blue and the device is switched on.
Press the POWER button on the remote control to turn the device o again (standby mode).
POWER
button on the remote control. The indicator light turns
NOTE:
Disconnect from mains power supply if not used, as the device uses a small amount of power in standby mode.
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG CTV 2404 LED-DVB-T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG CTV 2404 LED-DVB-T in the language / languages: English, German, Italian as an attachment in your email.

The manual is 4,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info