474117

AEG CTV 2404 LED-DVB-T Manual

70
Zoom out
Zoom in
Previous page
1/72
Next page
70
ENGLISH
15.2 Hotel Mode
1. Press SOURCE and enter 3690 with the numeric buttons.
2. The HOTEL MENU is displayed.
3. Perform the settings with the arrow buttons
/ .
-
Max Volume:
Set the maximum volume for the device.
-
Contrast Lock:
Activate/deactivate the contrast lock. With activated
function the contrast in the PICTURE menu cannot be changed.
-
ColorTemp Lock:
Activate/deactivate the colour temperature lock.
-
Channel Delete:
When this function is switched on (No), the programs in
the menu “Programme Edit” cannot be deleted.
4. Press EXIT to exit the menu.
16. Troubleshooting
Before contacting customer support try to solve the problem with the tips from the following table:
Problem Possible cause and proposal for solution
No image, status LED not on
• Check if the mains plug sits properly in the wall outlet.
• Check mains power on the wall outlet with a dierent device or connect TV set to
dierent wall outlet.
• Check if the signal cables from source devices are properly connected.
• Check if the source device is turned on.
Image ickers
• Check if the input signal of the source device matches the specications of the TV set.
• Check if the PC menu settings match the video output settings of the PC.
• Set the values again.
TV set cannot be turned on. • Check if the mains plug sits properly in the wall outlet.
No sound.
• Check if the audio cables are properly connected.
• Check the volume.
Volume too low.
• Check the volume.
• Set the volume.
• Check if the volume is limited in the hotel mode menu.
Snowy image. • Check if antenna or antenna cable are damaged.
Remote control does not work.
• Check if the batteries are exhausted.
• Check if the batteries make proper contact and are inserted with the correct
polarity.
• Ensure that no obstacles are between remote control and sensor.
• Check if strong light sources shine onto the sensor.
Device is not operational.
• Disconnect from mains power supply for approx. 5 seconds. Then switch the device
on again.
Defective Pixels
Defective pixels are no TFT panel malfunction. Production-related defective pixels cannot be avoided. Just like conver-
gence defects for cathode ray tubes are defective pixels only a tolerance value.
Our TFT panels oer best value for price and quality.
Defective pixels can be caused by pressure on the panel.
Complex testing procedures during and after manufacture ensure that all defective pixels of our TFT panels are below the
respective tolerance level.
The number of defective pixels depends on the kind of pixel and/or sub pixel defect, resolution and panel size.
… 70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG CTV 2404 LED-DVB-T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG CTV 2404 LED-DVB-T in the language / languages: English, German, Italian as an attachment in your email.

The manual is 4,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info