Manual AEG AR 4021 BT (page 82 of 114) (English, German, Italian, Polish, Portuguese, Spanish)

480501

Zoom out

Zoom in

1/114

ENGLISH

Connection

WARNING

During installation damages may occur!

Have the unit installed by a specialized workshop, if

►

possible.

Please observe all installation and connecting instruc-

►

tions for safe and trouble-free operation if installing

the unit yourself.

CAUTION

Wrong connections may damage the unit.

Use the ISO connectors when installing the unit.

►

Vehicle-specic ISO adapters are available at the

specialized car accessories trade, if necessary.

Rear Panel Connections

C BDE

A ISO connector B (speakers)

B Vehicle at fuse (5 A)

C ISO connector A (power supply)

D LINE OUT:

RCA audio output L/R for amplier

E Antenna connector

Conguration ISO Connectors

ISO connector A 1 Not connected

2 Not connected

3 Not connected

4 Continuous plus (memory)

5 Control voltage for electron-

ic/motor antenna or power

amplier

6 Not connected

7 12 V (ACC)

8 GND

ISO connector B

1 Speaker rear right +

2 Speaker rear right -

3 Speaker front right +

4 Speaker front right -

5 Speaker front left +

6 Speaker front left -

7 Speaker rear left +

8 Speaker rear left -

CAUTION

Use speakers with an impedance of at least 4 Ohm.

►

The speaker cabling must be oating ground.

►

NOTE

For connecting the unit to two speakers only use only

►

front speaker cables.

Please observe that for the station memory connec-

►

tor 4 must be connected to continuous positive.

In some vehicle models the standard conguration

►

for connectors [4] and [7] (ISO A) is inverted. In this

case the station preset can get lost. To remedy invert

these connections 7 (ACC) and 4 (continuous posi-

tive).

Auto Antenna Power Supply A5 (ISO A)

CAUTION

Damage to the unit is possible!

Do not connect the terminal for antenna power to

►

the power supply of the antenna.

Max. load: 100 mA.

►

The terminal for antenna power is provided for a relay-

controlled antenna. The relay automatically extends the

antenna when the radio is turned on. The antenna retracts

again when the radio is turned o. This terminal can also

be used for an external amplier. Please nd details in the

amplier’s manual.

Connect External Amplier

Connect an external amplier via LINE OUT. Please nd

details in the amplier’s manual.

Installation and Removal

The unit can be installed in any ISO installation slot. Please

contact the car manufacturer or the local dealer if your

vehicle does not come with an ISO slot.

NOTE

Before installation remove the two transport securing

►

screws.

Connect all cables before mounting the unit. Ensure

►

all connections are correct and the system works

properly.

Important additional information for installation of

your car radio!

1. The set is designed for an installation where the nega-

tive pole of the battery must be connected to the

vehicle chassis. Please check this before installation.

2. Please note for installation/connection of your set

that not every vehicle is equipped with an “ISO

connection”. In this case we recommend the use of a

vehicle-specic ISO adapter.

Adapters are available from car accessory sellers and/

or your car workshop.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG AR 4021 BT in the language / languages: English, German, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 7,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG AR 4021 BT Manual

Product: