632360
17
Zoom out
Zoom in
Previous page
1/33
Next page
- 17 -
Illustration: installation with ventilation around the flue pipe
2.3 Connecting the flue pipe
The fireplace insert can be connected using either flexible piping or regular flue piping. If you use flexible piping, you
must ensure that the piping is designed for flue gas use, and can withstand high temperatures. Flexible piping may
only be used in an existing fireplace installation. Therefore we recommend that you consult your chimney sweep
before using flexible piping. You can use both the top and rear outlets on the fireplace insert, depending on what
suits your installation best. The Aduro 5-1 is supplied ready for fitting the flue pipe on the top. If the flue pipe is to be
fitted on the back, the round circle should be removed from the rear plate of the fireplace insert. The cover plate
(that covers the rear outlet) should then be moved to the top outlet. A flue pipe with an internal diameter of 150 mm
should be used for the Aduro 5-1.
It will usually be easier to use flexible piping if there is not particularly good access to the chimney. If, on the other
hand, you have complete access, we recommend that you use a regular 2.0 mm steel flue pipe.
Flue piping in new installations
The easiest way of installing the flue pipe is through a chimney with an aperture of 160 mm straight above the
exhaust connector on the inset. In this case, a straight 2.0 mm flue pipe with an internal diameter of 150 mm of a
suitable length should be used. 3 x gasket bands should be placed around the flue pipe, which is then pushed up
into the chimney. The fireplace insert is placed in position and the flue pipe is pulled down over the exhaust
connector.
The fireplace insert can also be fitted with a steel chimney. The steel chimney should be placed directly above the
exhaust connector. We recommend the use of a steel chimney that is self-supporting and fitted with a telescopic
flue pipe. This solution allows you to lift the flue pipe and remove the insert without affecting the chimney.
Remember that the space above the fireplace insert should be sealed off with a horizontally positioned non-
flammable plate. This plate should be installed at least 85 cm below the ceiling. The space under this plate (above
the fireplace insert) should be ventilated as described on the previous page.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aduro 5-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aduro 5-1 in the language / languages: English, German, Danish as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info