Manual Aduro 5-1 (page 16 of 33) (English, German, Danish)

632360

Zoom out

Zoom in

1/33

- 16 -

Please note: that the Aduro 5-1 must be installed on a floor with the adequate load-bearing capacity. If the existing

construction does not meet this requirement, appropriate adaptation measures must be taken (e.g. a load-

distributing plate).

If the fireplace insert is to be placed close to flammable material, such as a wooden floor or carpet, it must be

placed on a non-flammable base. The floor plate should extend for at least 30 cm in front of the fireplace insert, and

15 cm on each side.

2.2 Convection and ventilation

The Aduro 5-1 is built as convection stove. This means that air from the room circulates between the inner stove

and the outer covering. As a result, the heated air is distributed evenly throughout the room. In order to fully exploit

the energy in the wood, however, the heat generated around the fireplace insert and the flue pipe (that connects the

fireplace insert to the insulated chimney) should also be used. The calorific values depend on the length of the

uninsulated flue pipe – initially, the first metre of uninsulated flue pipe will increase the efficiency by approx. 5 %.

There should be at least 25 mm space around the fireplace insert. It is important that the space around the fireplace

insert and the flue pipe is ventilated. There should be ventilation openings of at least 200 cm2 both below and

above the fireplace insert. There are many ways to create ventilation around the flue pipe. Some examples are

given below.

2,5 cm space

Flammable material

5,0 cm insulation

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Aduro 5-1 in the language / languages: English, German, Danish as an attachment in your email.

The manual is 1,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Aduro 5-1 Manual

Product: