97028
180
Zoom out
Zoom in
Previous page
1/199
Next page
ENCORE CS3
User Guide
176
DVD Image Or Blu-ray Image Builds a Blu-ray or DVD image on your hard drive. The image is typically used for
local replication by using a third-party mastering application.
DVD Master Writes to a digital linear tape (DLT) used for mass replication of DVDs. Creating a DVD master
requires having a DLT drive connected to your computer. Building a master creates a DDP (Disc Description
Protocol) report, which replication facilities might require.
Note: The Master output option is not available for Blu-ray discs.
5 Specify the source (such as the current project), the destination (such as the disc recorder drive), and any other
appropriate settings. The settings are different depending on the Output option you choose.
6 Click Build.
7 Save the project if prompted.
8 If you have any problems in your project, you are prompted to manage them or ignore them. Adobe recommends
that you fix all problems, and then click Build again.
9 When writing is complete, click OK.
Blu-ray and DVD build settings
The Build panel includes three sections—Source, Destination, and Disc Info—that are common to Blu-ray and DVD
formats. Additional sections for DVD Settings include DVD-ROM Content, Region Codes, and Copy Protection.
The options in these sections vary, depending on the format and type of output you choose:
Source Specifies which project to use for the build:
Create Using The current project appears by default if you are building your working project. Other options
include DVD Volume, to specify a DVD project youve already built to a folder; and Disc Image, to specify a Blu-ray
or DVD project you’ve built to an image file on your hard drive. Click Browse to locate and specify the project.
Destination Specifies where to write your project:
Location For output to Folder or Image, specifies the destination for your build folder or disc image. Click Browse
to specify the location.
Recorder For output to Disc or DVD Master, specifies the disc writer or DLT drive to which the project is sent for
burning. Click Refresh to scan your hardware for additional recorders.
Test Before Writing Tests the recorder, not the project, before burning the disc. To test the project, see “Check a
project” on page 172.
Write Speed Specifies how fast the selected recorder writes to the disc. Encore displays the maximum speed of
the drive you selected. You can select a lower speed.
Number Of Copies Type the number of discs to burn. If you choose to burn multiple copies, Encore prompts you
to insert new discs when needed.
Auto-Erase Re-Writable Discs Erases rewritable discs that already contain data before the program writes the new
data. Selecting this option bypasses the alert message that normally appears later in the process.
Disc Info Displays the amounts of free and used disc space for the current project. (For more information, see
Check the space remaining on your disc” on page 28.)
For Blu-ray Disc image output, Disc Info also includes the following Image Type options:
BD-R Image Type Write-once, recordable format for high-definition TV recording and computer data storage
BD-RE Image Type Re-writable format for high-definition TV recording and computer data storage
180


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Adobe Encore CS3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Adobe Encore CS3 in the language / languages: English as an attachment in your email.

The manual is 14,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info