541325

Acoustica CD-DVD Label Maker Manual

74
Zoom out
Zoom in
Previous page
1/85
Next page
has room to slide around inside the paper tray, there's a good chance that this will cause
alignment errors on a large variety of printer models.
Printer Calibration Wizard Intro Page
Printer Calibration Wizard Alignment Page
Printer Calibration Wizard Finish Page
Help Contents
The Printer Calibration Wizard:
Alignment
Page
On this page of the wizard, you'll enter the horizontal and vertical offsets to account for the
alignment error you measured on the aligment-test sheet that just printed.
Horizontal Adjustment:
Unfold the sheet you printed, turn it sideways, and see where the fold
crease crosses the axis labeled "Horizontal Offset". Enter the number you measure in this edit
control. If the fold crease is above the center line, you'll be entering a negative number. If the
crease doesn't have the same offsets on the two grid lines at the edges of the sheet as it does
on the center grid line/axis, it's an indication that your printer feeds paper through itself
crookedly. (Although it could mean that you just didn't fold the sheet perfectly -- check that
first.) If it doesn't feed straight, try using the value at the center of the sheet and then
compensating for the printer's drift with the stretch settings in the Printer Alignment dialog
(accessible by clicking the "Alignment" button on the Print dialog).
Vertical Adjustment:
Unfold the sheet you printed, turn it right-side up, and see where the
fold crease crosses the axis labeled "Vertical Offset". Enter the number you measure in this
edit control. If the fold crease is above the center line, you'll be entering a negative number. If
the crease doesn't have the same offsets on the two grid lines at the edges of the sheet as it
does on the center grid line/axis, it's an indication that your printer feeds paper through itself
crookedly. (Although it could mean that you just didn't fold the sheet perfectly -- check that
first.) If it doesn't feed straight, try using the value at the center of the sheet and then
compensating for the printer's drift with the stretch settings in the Printer Alignment dialog
(accessible by clicking the "Alignment" button on the Print dialog).
Print another test sheet with my revised settings:
If you check this box, once you click the
"Next" button, the wizard will print another copy of the alignment-test sheet with the horizontal
and vertical adjustments you've entered on this page, so you can see if they produce a
perfectly centered page.
A
Few Bonus Calibration Tips:
* Make sure your paper fits snugly in the paper tray! If your paper has room to slide around
inside the paper tray, there's a good chance that this will induce alignment errors. Checking
this could eliminate the need for alignment correction altogether.
Pa
g
e 74 of 85
6/13/2006file://C:\acoustica\cdlabelmaker\hel
p
\c
d
-label-make
r
-flat.htm
… 74 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acoustica CD-DVD Label Maker at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acoustica CD-DVD Label Maker in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info