Manual Acoustica CD-DVD Label Maker (page 75 of 85) (English)

541325

Zoom out

Zoom in

1/85

* If the alignment-test sheet indicates that your alignment is much worse than you expected,

make sure you checked the correct paper-size option before you printed the sheet. The paper

size that the wizard thinks you printed on will be noted near the top-left corner of the alignment

test sheet. If you checked the A4 box but inserted a sheet of letter paper, for instance, the

alignment sheet will obviously be off center.

* Some printers will feed differently depending on the paper thickness. If you want to be

absolutely sure you've got your alignment as accurate as possible, try printing the test sheet

on a sheet of your actual label paper. This will cost you a sheet of your label paper, of course,

so you may prefer to wait and see first whether you were able to compensate for your printer's

alignment just by printing the test sheet on plain paper. If you do decide to print an alignment

sheet on a sheet of label paper, make sure you've checked the right paper size setting. In

particular, lots of DVD-case-cover sheets use A4 paper. If you're used to printing on letter-

sized paper, measure your DVD cover paper before you print an alignment test sheet on it to

make sure you know what size it is.

* Some printers just don't have consistent alignment. One printout will be off in one direction,

and another will be off in a different direction. You can test for this by setting the "Number of

Copies" control on the Test-Sheet page of the wizard to print multiple copies of the sheet. If

each sheet has a different alignment error, you probably can't make alignment adjustments

that will always work. Your best bet is probably to enter an average value on this page and

then try to compensate for the printer's inconsistency with the stretch settings in the Printer

Alignment dialog (accessible by clicking the "Alignment" button on the Print dialog). Acoustica

CD/DVD Label Maker defaults to a stretch setting of two millimeters, which means that a label

you print will be two millimeters taller and two millimeters wider than the actual size of the label

on the sheet, in the hopes that this extra bleed area will prevent minor alignment problems

from causing edges of the label not to get printed on. If your printer is a schizophrenic wreck

and displays wildly different alignments from sheet to sheet, you might need to increase this

value.

* Since this wizard works by printing calibration tests on paper, it works well for handling

alignment errors on label paper, but isn't suited for handling alignment errors for CD trays that

you insert into your printer for printing directly onto printable CDs. To align your printable CDs,

try using the "Edit Paper Templates" Dialog, which you can access from the "File" menu.

Printer Alignment Wizard Intro Page

Printer Alignment Wizard Test-Sheet Page

Printer Alignment Wizard Finish Page

Help Contents

The Printer Calibration Wizard:

Finish

Page

If you got this far, you've finished the calibration wizard. Congratulations! We had every

confidence that you'd arrive.

e 75 of 85

6/13/2006file://C:\acoustica\cdlabelmaker\hel

-label-make

-flat.htm

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Acoustica CD-DVD Label Maker in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Acoustica CD-DVD Label Maker Manual

Product: