541325

Acoustica CD-DVD Label Maker Manual

72
Zoom out
Zoom in
Previous page
1/85
Next page
This dialog lets you set an image from your computer as a tiled label background and control a
variety of settings for how the image gets tiled. Here's what all the controls do:
Real-Time Preview:
If you check this box, any changes you make will display on the label
immediately, so you can see how well they work. If you uncheck it, you won't be able to see
your changes until you click the OK button to exit the dialog.
150 DPI:
This option will tile the image at 150 dots per inch. It's the default option for bitmap-
based images. (For vector-based images, such as WMF files, dots per inch effectively has no
meaning, so you'll have to set custom rows and columns.) If you tile at resolutions lower than
150 DPI, there's a good chance the image could begin to look grainy or distorted when you
print it.
300 DPI:
This option will tile the image at 300 dots per inch.
Custom DPI:
This option will let you tile the image at the dots-per-inch resolution of your
choice.
Custom Rows/Columns:
This option will let you choose your tiling resolution in rows &
columns instead of dots per inch.
Keep Aspect Ratio:
This option only applies to the Custom Rows/Columns tiling mode. If it's
checked, the image will always maintain its original aspect ratio, so if you change the number
of rows, the number of columns will automatically change to keep the aspect ratio constant,
and vice versa. If you uncheck this option, you can set both rows and columns precisely, but if
you change the aspect ratio, the image could appear stretched or squished.
Cropping Controls:
The cropping options let you crop the image so that portions of it don't get
displayed. The cropping amounts you specify in these controls are measured in pixels. The
default is 0 pixels (no cropping at all).
Justification:
These options let you control horizontal and vertical justification for your image.
You can align your image to the left or right edges of your label, or center it. You can align it
vertically to the top or bottom edge of the label, or make it centered vertically on the label.
Blend Edges:
This option will blend the edges of the image together so that there's not a
visible seam between the tiles. This option generally works best on images that don't have
sharply defined contours or objects on them - a photograph of clouds, for instance, would be a
good candidate for the blend-edges effect. If you're not sure whether or not it will work for your
image, go ahead and check the box and see. It takes almost no effort, after all - you'll consume
less than half a calorie, in our judgment - to uncheck the box again if it doesn't look good.
Help Contents
The Printer Calibration Wizard
Pa
g
e 72 of 85
6/13/2006file://C:\acoustica\cdlabelmaker\hel
p
\c
d
-label-make
r
-flat.htm
… 72 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acoustica CD-DVD Label Maker at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acoustica CD-DVD Label Maker in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info