755222
89
Zoom out
Zoom in
Previous page
1/116
Next page
Chapter III – Installation instructions – Option 97: Walk Test
83
Inactive = 2K2 ±20%
Activated = 6K9 ±20%
Masked = 4K4 ±20% or 9K1 ±20%
Tamper = < 2K2 -20% oder 9K1 +20%
For NC (normally closes) zones:
Inactive = alarm contacts closed and
tamper contacts closed
Active = alarm contacts open and tamper
contacts closed
Tamper = tamper contacts open
For wiring examples, see Appendix IV –
Wiring Information on page 89.
2.57 Option 97: Walk Test
e.g. 1
With this option, you can check whether the
sensors of the alarm system are working properly.
After starting the test, enter the partitions and
trigger the sensors. For every activation, a tone
sounds on the operating panel and the display
shows the open zone.
Cancel the walk test by pressing . Triggered
zones are shown as “OK” again. Press again
to exit the menu.
2.58 Option 98: Default Menus
Select this option to reset system settings to the
factory defaults. The factory settings are listed in
Appendix III – Factory Defaults on page 86.
2.59 Option 99: Leave Engineering Mode
Use this option to exit program mode. The
operating panel returns to normal mode and the
date and time are displayed. This option has the
same effect as when you press and on
the top level of the program menu.
[ENT] to DEFAULT
Custom Text?
[ENT] to DEFAULT
Modem Data?
9
8:Default Menus
Esc To Stop Test
& View Zones
Panel Zone 1
0001 Healthy
Panel Zone 3
0033 Healthy
Walk Test
Ptns > 12......
Walk Test
Ptns > *2......
97:Walk Test
89


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus Terxon LX - AZ4200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus Terxon LX - AZ4200 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Abus Terxon LX - AZ4200

Abus Terxon LX - AZ4200 User Manual - English - 16 pages

Abus Terxon LX - AZ4200 Installation Guide - German - 31 pages

Abus Terxon LX - AZ4200 User Manual - German - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info