755222
12
Zoom out
Zoom in
Previous page
1/16
Next page
Operating Instructions – Terxon L
12
8. Troubleshooting
This chapter contains a summary of the messages displayed on the operating
panel when resetting the system (see “Resetting the system“ on page 10).
If you cannot clear an error yourself, contact the engineer.
8.1. Alarm messages
An alarm has occured. The zone number, date and time are displayed.
The built-in modem reports a fault in the telephone line. You cannot set your
system until the fault has been cleared.
There is no mains to the control unit and the system is running on its standby
battery. You cannot set your system until the mains power supply is restored. If this
fault continues indefinitely, the standby battery will fail and the system will switch
off.
The emergency power supply (standby battery) reports a fault or has been cut off.
You cannot set your system until the fault has been cleared.
The lid of the alarm centre was opened. You cannot set your system until the fault
has been cleared.
The alarm centre has additional tamper zones for monitoring auxiliary modules.
The lid of an auxiliary was opened. You cannot set your system until the fault has
been cleared.
The lid of the external bell was removed. You cannot set your system until the fault
has been cleared.
One or more sensors have failed an engineer test. You can set/unset your alarm
system, but you should contact the engineer.
This message is displayed if the tamper contact of a zone is triggered.
The engineer code or the remote reset code must be entered to reset the system.
Contact the engineer for an engineer reset.
ALARM 0005
08:13:45 01/01
Battery Fault
PANEL LID TAMPER
08:13:45 01/01
PSTN LINE FAULT
12:00 Sun 01 JAN
TEST CCTS FAILED
12:00 Sun 01 JAN
TAMPER 0001
Office Window
CALL ENGINEER TO
RESET SYSTEM
Reset Required
AUXILIARY X TAMP
12:00 Sun 01 JAN
AC Mains Fault
BELL TAMPER
12:00 Sun 01 JAN
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus Terxon LX - AZ4200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus Terxon LX - AZ4200 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Abus Terxon LX - AZ4200

Abus Terxon LX - AZ4200 Installation Guide - English - 116 pages

Abus Terxon LX - AZ4200 Installation Guide - German - 31 pages

Abus Terxon LX - AZ4200 User Manual - German - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info