755222
13
Zoom out
Zoom in
Previous page
1/16
Next page
Operating Instructions – Terxon L
13
8.2. Other messages
The alarm system needs servicing. You can still set or unset, but you should
contact the engineer.
The hardware configuration of the alarm system has changed. You cannot set your
system.
This message is displayed if an operating panel is locked after too many invalid
code entries. After five minutes, the message is automatically cleared and the
operating panel is unlocked.
The alarm system has an automatic setting feature that sets/unsets specific
partitions automatically at scheduled times. This message is displayed one minute
before the scheduled time and an setting gong sounds every 10 seconds to warn
you about the pending setting. If you have the right user code, you can delay
automatic setting by entering the code.
The engineer is on site and the logged into the alarm system. If necessary, you can
operate the system normally. This message is automatically cleared when the
engineer logs out.
Another user is currently accessing the alarm system. You cannot use your
operating panel as long as this message is displayed.
Cannot set because of a tamper fault on auxiliary zone 1 or 2. Clear the error.
Cannot set because of a tamper fault on the external sounder. Clear the error.
Cannot set because of a fault from one or more components. Clear the error.
Cannot set because of a fault from one or more zones. Press to view the zone
concerned. Clear the error.
Cannot set because of a tamper fault on the control unit. Clear the error.
Cannot set because there is no mains power at the control unit. Clear the error.
Cannot set because of a line fault from the remote signalling device. Clear the error.
The operating panel has been locked out of the system (normally by a keyswitch)
and cannot be used by other users.
RELEARN REQUIRED
12:00 Sun 01 JAN
CODE TAMPER
KEYPAD LOCKED !
SYSTEM IS BUSY
PLEASE WAIT
Sorry, cannot set
Zone in fault
Sorry, cannot set
Panel lid tamper
Sorry, cannot set
Mains Power off
Sorry, cannot set
Phone line fault
SERVICE REQUIRED
12:00 Sun 01 JAN
Engineer on Site
12:00 Sun 01 JAN
Sorry, cannot set
Equipment faulty
! AUTO SETTING !
12:00 Sun 01 JAN
Sorry, cannot set
Aux X tamp open
Sorry, keypad
Is locked out
Sorry, cannot set
Bell box tamper
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus Terxon LX - AZ4200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus Terxon LX - AZ4200 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Abus Terxon LX - AZ4200

Abus Terxon LX - AZ4200 Installation Guide - English - 116 pages

Abus Terxon LX - AZ4200 Installation Guide - German - 31 pages

Abus Terxon LX - AZ4200 User Manual - German - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info