755222
9
Zoom out
Zoom in
Previous page
1/16
Next page
Operating Instructions – Terxon L
9
7.1.2. Setting additional partitions
If some partitions of your alarm system are already active and you want to set
further partitions, do the following:
1. Enter your user code on the keypad or hold your chip key against the
control panel.
2. The bottom line of the display shows partitions you can access and which
one of these are set/unset. In this example, you can access partitions 1
and 2, but only partition 2 is active.
3. If you only want to set a partition, press the corresponding number key on
the number pad. For example, press 1 to select partition 1.
4. Confirm the selected partition with and continue with the next step
(see “Setting the alarm system“ on page 8).
7.2. Unsetting
To unset your alarm system, go to an operating panel and follow the instructions.
If the internal sounder is making a sound:
1. The internal alarm sounder will sound and you will see the message shown
left. Since you have entered an area monitored by the alarm system, the
entry timeout starts. The signal tone continues to sound until you unset the
system or the timeout expires.
2. Enter your user code on the keypad or hold your chip key against the
control panel.
The alarm system is now unset.
Important ....................................................................................................................
Due to the way your user code is programmed, you can only unset partitions to
which you have access.
An alarm is triggered if you do not unset the alarm system within the preset
entry timeout.
If there is no sound (entry timeout has not started):
1. Enter your user code on the keypad or hold your chip key against the
control panel.
2. The bottom line of the display shows partitions you can access and which
are set/unset. In this example, you have access to partitions 1, 2 and 3, but
only partitions 1 and 2 are set.
You now have the following options:
To Unset all partitions:
Press to unset all active partitions.
To Unset a single partition:
Press the number key on the keypad corresponding to a set partition. In this
example, press 2 to set partition 2.
The display shows the partition you have selected for Unsetting.
To select another partition, press or . The bottom line shows the partition
name if defined by your engineer.
Confirm the Unsetting of the selected partitions with .
Set Prtn 1?
BANNER TEXT
17:30 Sun 01 JAN
ENT=Unset System
Ptns > *2……
ENT=Unset System
Ptns > 12*…..
Unset Prtn 2?
Please Unset
System
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus Terxon LX - AZ4200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus Terxon LX - AZ4200 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Abus Terxon LX - AZ4200

Abus Terxon LX - AZ4200 Installation Guide - English - 116 pages

Abus Terxon LX - AZ4200 Installation Guide - German - 31 pages

Abus Terxon LX - AZ4200 User Manual - German - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info