755222
8
Zoom out
Zoom in
Previous page
1/16
Next page
Operating Instructions – Terxon L
8
7. Operating the alarm system
This chapter tells you how to operate your alarm system. It describes basic
functions such as Setting and Unsetting as well as more advanced features.
7.1. Setting
Before your alarm system can detect an attempted break-in and trigger an alarm, it
first has to be set. The next section tells you how to set it.
7.1.1. Setting the alarm system
To set your alarm system properly, carry out the steps described below.
Before activating, check that all relevant areas have been vacated and
all doors and windows closed. You cannot set the system if any zones
are open (see “Setting the system with zones active” on page 14).
1. Enter your user code on the keypad or hold your chip key against the
control panel. You can press without activating the system.
2. In the bottom line of the display, a “*” is used to identify the partitions you
can set. In this example, partitions 1 and 2, but not partitions 3–8 can be
set.
Complete setting:
To set the complete alarm system, press the key and go to step 3. Setting
depends on the partitions assigned to the user.
Partial setting:
If you only want to set a partition, press the corresponding number key on the
number pad. For example, press 2 to select partition 2.
The display now shows the selected partition. To select a different area, press
or . The bottom line shows the partition name if assigned.
Confirm the selected partitions with .
You now see a message informing whether zones have been omitted or
shunted. Press to confirm.
3. Now leave the monitored area. You now hear a signal tone from the alarm
sounder for the length of the exit timeout (if not blocked by your engineer).
4. Close the outer door and press the terminator button (if fitted).
5. When the signal tone stops, the system is active.
Important ....................................................................................................................
If the signal tone changes to an alarm tone, read the section “Silencing an
alarm” on page 10. You can exclude zones from setting.
ENT to Set With
Zones Shunted
BANNER TEXT
17:30 Sun 01 JAN
Set Partition?
Ptns > **……
Set Prtn 2?
ENT to Set With
Zones Omitted
17:31 Sun 01 JAN
Exit Now
Arming System
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus Terxon LX - AZ4200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus Terxon LX - AZ4200 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Abus Terxon LX - AZ4200

Abus Terxon LX - AZ4200 Installation Guide - English - 116 pages

Abus Terxon LX - AZ4200 Installation Guide - German - 31 pages

Abus Terxon LX - AZ4200 User Manual - German - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info