Manual Abus fusg50101 (page 30 of 93) (English, German, Dutch, Danish, French)

756185

Zoom out

Zoom in

1/93

Installation

30 | EN

Step 5: Mount the sounder on the wall

Note

A pin serves as an anti-removal wall contact to activate the tamper switch on the inside of the

sounder. To fit uneven walls, the length of this pin can be adjusted. To do this, turn the screw,

which is in the pin, either in or out.

If the wall tamper contact is still not triggered in the case of extremely uneven walls, you can snap

the pin firmly into place by turning it. Tamper detection for the wall is thus deactivated.

Caution

With this installation, the sounder can be torn off the wall without a tamper alarm being triggered.

Equally, if the sounder is missing it is no longer possible for an alarm to be signalled. The sounder

also loses its certification for security level 2 as a result.

To prevent this, the tamper mechanism can be fixed to the wall, and will break off at the defined

predetermined breaking points in the event of a tamper attempt, recognising a tamper alarm.

 Place the sounder on the wall and align it vertically using the integrated spirit level. Mark the

three fixing points.

Note

You can also fix the tamper mechanism to the wall.

Note

The appendix also contains a drilling template.

 Drill the holes in the wall to fit the diameter of the screw anchors. Insert the screw anchors

supplied, in the holes.

 Insert the screws supplied through the sounder’s fixing holes. Turn the screws in the screw

anchors. Do not tighten the screws yet.

 Vertically align the sounder again using the spirit level. Now tighten the screws.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Abus fusg50101 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Abus fusg50101 Manual

Product: