Manual Abus fusg50101 (page 29 of 93) (English, German, Dutch, Danish, French)

756185

Zoom out

Zoom in

1/93

Installation

29 | EN

Step 4: Teach in sounder in the alarm panel

 If this has not been done already, switch the alarm panel on.

 Place the sounder next to the alarm panel or within range of the alarm panel with which it

communicates.

 Select:

Installer Mode -> Components -> Outdoor sounders -> Wireless sounders ->

Add/remove sounders -> Wireless sound. 0x

The message “Activate the tamper contact of the sounder” is displayed.

Leave the alarm panel in this state during the next step.

 Connect the two batteries to the sounder, taking care to observe correct polarity (see Fig.

2).

Caution and Important

The sounder or the batteries could get damaged if correct polarity is not observed.

The sounder then sends a teach-in signal to the alarm panel. The alarm panel recognises

the sounder and the message “Sounder added” is displayed. If this message is not dis-

played, disconnect the batteries and reconnect them after waiting 30 seconds.

Note

The batteries are already connected.

Disconnect the batteries and reconnect them so that the sounder sends the teach-in sig-

nal to the alarm panel.

Figure 2: Battery connector

 Disconnect the batteries again to prevent the sounder activating itself. Do not exit installer

mode on the alarm panel.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Abus fusg50101 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Abus fusg50101 Manual

Product: