Manual Abus fusg50101 (page 28 of 93) (English, German, Dutch, Danish, French)

756185

Zoom out

Zoom in

1/93

Installation

28 | EN

Installation

Installing the sounder

Step 1: Select installation location for the sounder

Select an installation location which:

 is inaccessible to intruders and vandals

 is located well out of reach (>3 m)

 is clearly visible, so that it acts as a strong deterrent

 is within the wireless range of the alarm panel (max. 500 m outdoors).

Note

The wireless signal strength should be tested using the test box at the installation loca-

tion for the sounder and the alarm panel prior to installation.

The sounder must not be installed in the following locations:

 at a distance of less than 1 m from large metal structures such as metal doors or frames,

water tanks, refrigerators or cars

 at a distance of less than 1 m from household electrical systems, distributors or metal pipes

 inside metal housings

 close to high-voltage devices or electronic devices such as computers, photocopiers or

other wireless devices

Step 2: Open the sounder’s cover

 Open the two covers for the two lid-fixing screws (see Fig. 1).

 Remove the fixing screws and open the cover.

Step 3: Configure the sounder’s jumpers

 Remove the jumper/connector cover (see Fig. 1) by pushing the two fixing tabs (see Fig. 1)

outwards and lifting up the cover at the same time.

 Set all the jumpers in the sounder to the desired positions (see Fig. 3).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Abus fusg50101 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Abus fusg50101 Manual

Product: