677198
18
Zoom out
Zoom in
Previous page
1/32
Next page
18
You can always return sensitivity to factory default. First press SW1 three (3)
times and soon after hearing the three sounds, press SW1 again 3 times. That
interrupts adjustment and device returns to factory setting.
Adjust the sensitivity of the device every time the sensor is re-installed, if the
user or the sensor changes.
14. Signal lights (picture 22)
Green Presence
Light flashes every second time
compared to blue light.
A person is on the bed or other movement is
being made.
Light flashes the same speed as blue
light.
A person has been on the bed for 60 seconds
and the device has become activated.
Light flashes rapidly.
Fast-paced movement on the bed detected.
Light is off.
No one is on the bed.
Blue Device on/standby
Light is off.
Device is switched off.
Light flashes slowly.
Device is switched on.
Light flashes rapidly a few times.
Device triggers a notification.
Red Malfunction
Light is flashing the same speed as blue
light
The sensor is disconnected or defective.
Signal alarm sounds after 10 seconds and
then every 45 seconds. There is also an alarm
sent through the X2 connector after 30
seconds and then every 30 minutes.
Light is flashing every fourth time
compared to blue light.
Batteries are empty. Replace batteries.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abilia 464001 Emfit SafeBed at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abilia 464001 Emfit SafeBed in the language / languages: English as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Abilia 464001 Emfit SafeBed

Abilia 464001 Emfit SafeBed User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info