Manual AAS Ultra Analog VA-2 (page 52 of 66) (English)

541311

Zoom out

Zoom in

1/66

52 Parameters

Clicking on the Legato button switches the module into legato mode and the sliding between

two notes then only occurs if the second note is played before the ﬁrst one is released. When a

note is played staccato, or in other words if a key is released before the next one is depressed, there

is no glide effect. Note that even though the glide effect is available when the Key module is in

polyphonic mode, it is mostly dedicated to monophonic playing. In polyphonic mode, the sames

rules apply to individual voices and the overall result is less predictable.

4.4.5 The Vibrato Module

The vibrato effect is equivalent to a periodic low frequency pitch mod-

ulation. This effect is generally obtained by using an LFO to modulate the

pitch signal of an oscillator. In Ultra Analog VA, a dedicated module is

provided for this effect. The vibrato module is hard wired and affects the

pitch of both oscillators.

The Rate knob sets the frequency of the vibrato effect from 0.3 Hz to

10 Hz. The Amount knob sets the depth of the effect, or in other words the

amplitude of the frequency variations. In its leftmost position, there is no vibrato and turning the

knob clockwise increases the amount of pitch variation. The MW gain knob is used to determine

the effect of the keyboard modulation wheel on the depth of the vibrato. When this knob is fully

turned to the left, the modulation wheel has no effect but as it is turned clockwise the depth of the

vibrato increases when the modulation wheel is used. The increase is always relative to the position

of the Amount knob and becomes greater as the MW knob is turned clockwise.

The vibrato can be adjusted not to start at the beginning of a note but with a little lag. This lag,

in seconds, is set by the Delay knob. The Fade knob allows you to set the amount of time taken by

the amplitude of the vibrato effect to grow from zero to the amount set by the Amount knob.

4.4.6 The Arpeggiator Module

The Arpeggiator module allows one to play sequentially all the

notes that are played on the keyboard. In other words, arpeggios are

played rather than chords. The modules allows one to produce a wide

range of arpeggios and rhythmic patterns and to sync the effects to the

tempo of an external sequencer.

Arpeggio Patterns

The arpeggio pattern is set by the combination of the value of the

Range, Span and Order controls. The Range control is used to select

the number of octaves across which the pattern is repeated. When the range is set to 0, there is

no transposition and only the notes currently depressed are played. If set to a value between 1

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AAS Ultra Analog VA-2 in the language / languages: English as an attachment in your email.

The manual is 3,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AAS Ultra Analog VA-2 Manual

Product: