Manual AAS Ultra Analog VA-2 (page 50 of 66) (English)

541311

Zoom out

Zoom in

1/66

50 Parameters

Another parameter which affects the response of a room is its geometry; the more complex

the geometry of a room, the more reﬂexion are observed per unit of time. This quantity is known

as the time density and can be set trough the Diffusion knob. In a concert hall, the time density

is supposed to be quite high in order not to hear separate echoes which are characteristic of poor

sounding rooms.

The last parameter which affects our listening experience in a room, is the distance between

the sound source and the listener. While the room response is quite constant regardless of the

position of the source and the listener, the direct sound (the sound which comes directly from the

source) depends strongly on the position of the listener. The farther we are from the sound source

the quieter is the direct sound relatively to the room response. The ratio between the direct sound

and the room response is adjusted with the Mix knob which in other words is used to adjust the

perceived distance between the source and the listener. In its leftmost position, only the direct

sound is heard while when fully turned to the right, one only hears the room response. Note that

the Mix parameter is also adjustable from the Play view.

4.4 The Play View

The Play view is where the main performance oriented modules are located. Key parameters from

the Edit and FX view are also included for quick access. This view is loaded when starting the

instrument and can be accessed from another view by clicking on the Play button on the top part

of the interface.

The middle section of this view allows one to switch on and off the EQ, Compressor and

Reverb as well as the active effect modules. Key effect parameters are also adjustable as presented

in the description of the different effect modules in section 4.3

4.4.1 The Clock Module

This module is used to control the tempo of the different effects of the FX section

as well as that of the LFO and Arpeggiator modules when their respective sync button

is switched on. When Ultra Analog VA is launched in standalone mode the clock

tempo, in bpm, is set by using the Rate knob. The tempo can also be adjusted by

clicking at the desired tempo on the Tap Tempo pad of the module. Once the new

tempo is detected, the value of the Rate knob is automatically adjusted.

When using Ultra Analog VA in plugin mode, the Tap Tempo pad is replaced by

a Sync To Host switch. In its on position, the rate is synchronized with that of the host sequencer.

When switched off, the tempo is determined by the value of the Rate knob.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AAS Ultra Analog VA-2 in the language / languages: English as an attachment in your email.

The manual is 3,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AAS Ultra Analog VA-2 Manual

Product: