541310
85
Zoom out
Zoom in
Previous page
1/177
Next page
6.19 Control Voltage Sequencer 85
Figure 38: The pitch of a Plate module adjusted with a Constant module.
6.19 Control Voltage Sequencer
The Control Voltage Sequencer module enables you to record sequences of voltage. This
module in itself does not produce sound but is used, usually instead of a Keyboard module, to
control other modules such as VCO, VCA or filters. This module is a very complete 16-step
sequencer, which means that it plays sequences or patterns of 16 notes in loop. Sequences can
be set to have 1 to 16 steps. Because each sequence represents a bar containing four quarter
notes, each step of the sequencer itself represents a sixteenth note. The module can memorize 32
different sequences between which you can switch while playing. This module has three inputs
and four outputs. The first input is a sync signal which controls the tempo from an external source,
the second is a start/stop input which will start the sequencer when it goes form 0 to 1 volt and
stop it when it goes from 1 to 0 volt. The signal can come from another sequencer or a Keyboard.
The third one is a reset input which will restart the sequence from beginning when it goes from 0
to 1 volt. The first three outputs are the same as the inputs (sync, start/stop, reset) and are used to
control other sequencers. The fourth output is the control voltage signal.
This sequencer has 16 vertical bar sliders each controlling the output signal corresponding to
a given step. The output value ranging between -1 and 1 Volt can be adjusted by click-holing and
dragging or using the keyboard arrows once a bar is selected.
Creating Patterns
To create a pattern, you must first select its location. You can select it with a combination of letters
(A, B, C, D) and numbers (1 to 8), on the front panel, giving you a total of 32 patterns.
85


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AAS Tassman 4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AAS Tassman 4 in the language / languages: English as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info