541310
83
Zoom out
Zoom in
Previous page
1/177
Next page
6.16 Comb 83
(green LEDs on), the gain equals 1 and the resonance frequency variation is 1 Volt/octave. This
position is used to follow an equal temperament scale when connecting the output of a Keyboard
module to a modulation input of a Comb module. The frequency variation with the modulation
signal can be increased or decreased by turning the modulation knobs clockwise or anti-clockwise.
Finally the feedback knob is used to fix the amount of “wet” signal re-injected into the delay line.
Typical Use
The Comb filter can be used to obtain a vibrato effect on a sound source. In the example of
Figure 11, the output of the LFO modulates the resonance frequencies of the Comb filter. When
the feedback knob is adjusted in the left position and the mod1 knob is opened, the frequency of
the filtered signal varies with the output from the LFO. When the feedback knob is in the right
position, the filter may start to self-oscillate and be used as a sound source as in the patch of Figure
. In this example, the output of the Noise Mallet is filtered and the resonance frequency of the filter
is controlled with the pitch output from a keyboard. In order to obtain a tempered scale, do not
forget to adjust the mod knob of the filter in the middle position.
Figure 36: A vibrato effect obtained with a Comb filter
Figure 37: Comb and Noise Mallet as a sound source
83


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AAS Tassman 4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AAS Tassman 4 in the language / languages: English as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info