Manual AAS Strum Electric GS-1 (page 66 of 98) (English)

541315

Zoom out

Zoom in

1/98

66 Parameters

6.6.7 Aftertouch

In addition to the pitch wheel, monophonic aftertouch (channel pressure) can be

used to control a bending effect. The depth of the effect is controlled using the Depth

knob from the Aft. Touch section. In its center position, the depth is equal to 1 semi-

tone.

6.6.8 Hold Pedal

The hold pedal MIDI controller can have two functions in Strum. When the Hold

Chord button is switched on, Strum will hold the notes of a chord after the keys on the

keyboard have been released as long as the pedal is depressed or until another chord

is played. When the Alt. Strum button is switched on, the pedal can be used to switch between the

main and alternate Strum as described in section 4.4.4.

6.6.9 The Velocity Section

The velocity section allows one to control the modulation of certain parameters

with the MIDI velocity received by the application. The Pick/Fingers parameter is used

to adjust the amount of modulation of all the parameters in the Pick/Finger module

which are modulated by the velocity at once: jut, stiffness and damping. This control is

in fact an offset knob and it is used to vary the settings these parameters knobs around

their value speciﬁed in the Pick/Finger module. The Palm Mute parameter is used to

modulate the value of the Tone parameter in the Palm module with the velocity. When

the knob is in its leftmost position, there is no modulation from the MIDI note velocity

signal; turning this knob clockwise gradually increases the amount of modulation.

6.6.10 Mod Wheel

The modulation wheel is used to control vibrato. The speed and depth of the

vibrato is controlled by the Speed and Depth parameters respectively.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AAS Strum Electric GS-1 in the language / languages: English as an attachment in your email.

The manual is 2,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AAS Strum Electric GS-1 Manual

Product: