Manual AAS Strum Electric GS-1 (page 65 of 98) (English)

541315

Zoom out

Zoom in

1/98

6.6 Performance Parameters 65

The Range parameter under velocity in the Strumming section allows one to modulate the num-

ber of strings played with the MIDI velocity signal received by the program. This is used to emulate

the fact that the number of strings in a chord played by a guitarist may vary depending on the in-

tensity of the playing. When in its middle position and playing mezzo forte on the keyboard, the

lowest and highest strings in the chord will be excluded from the strumming. As the MIDI velocity

is reduced more and more strings are excluded while more are added as the velocity is increased.

In other words, the higher the velocity, the greater are the chances that all the strings in the chord

will be played. Moving the knob clockwise from its middle position makes it harder to play the

strings at the extremities therefore requiring a higher velocity. Turning the knob anti-clockwise has

the opposite effect and makes it easier and easier. In its leftmost position all the strings included

in the strumming range, as indicated by the Chord Range selector, are always played whatever the

value of the MIDI velocity.

6.6.5 Tuning

The Tuning module is used to transpose the output pitch of Strum. The output pitch

can be increased or decreased by one semi-tone by moving the tuning knob clockwise

or anti-clockwise respectively. When in its center position, Strum uses standard tuning

(A4 - 440 Hz).

The output can also be transposed by one octave by switching on the Octave button.

This is useful for reaching notes on the fretboard above C5 (MIDI note number 72)

where the special strumming keyswitches are located.

6.6.6 Pitch Wheel

The keyboard pitch wheel is used to perform bends or slides. A bend is an increase

of pitch obtained by pressing a string down on a fret and pushing the string up or down

after triggering the string with the fretting hand. It is usually limited to one or two

semi-tones. A slide is another technique used by guitar players to change the pitch of

a note. It is obtained by pressing a string down with a ﬁnger, triggering the string with

the fretting hand, and then moving the fretting ﬁnger up or down along the axis of the

neck of the guitar across a certain number of frets.

To choose between a bend or slide effect, click on the corresponding button of the pitch wheel

section. The range of the effect is selected from the Range drop-down menu. Note that a bend will

be applied on the last note played in a chord while a slide will be applied to all the notes forming

the chord.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AAS Strum Electric GS-1 in the language / languages: English as an attachment in your email.

The manual is 2,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AAS Strum Electric GS-1 Manual

Product: