541315
68
Zoom out
Zoom in
Previous page
1/98
Next page
68 Utility Section
7.6 Level Meter
The level meter allows one to monitor the RMS (root means square) level of the left (L) and right
(R) output channels from the synthesizer. As soft clipping is applied to the output signal in order
to limit its amplitude, it is important to make sure that the amplitude of the signal remains within
values that ensure that no distortion is introduced in the signal at the output.
The 0 dB mark on the level meter has been adjusted to correspond to -20 dBFS (full scale).
This means that at that level, the signal is -20 dB below the maximum allowed value. This 0 dB
level mark should typically correspond to playing at mezzo forte (moderately loud) level. This
ensures a headroom of 20 dB which should be more than enough to cover the dynamics of most
playing situations and therefore guarantee that that no additional distortion is added in the output
signal.
Distortion is introduced by the output when the signal enters the red section of level meter
which starts 3 dB below the clipping value. A peak value mark allows to follow the maximum
level values reached by the output signal and therefore determine if clipping as occurred or not.
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AAS Strum Electric GS-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AAS Strum Electric GS-1 in the language / languages: English as an attachment in your email.

The manual is 2,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info