541315

AAS Strum Electric GS-1 Manual

54
Zoom out
Zoom in
Previous page
1/98
Next page
54 Parameters
adjust the ratio of “dry” and “wet” signal in the output signal from the module. When the knob is
adjusted in the left position, only the original or “dry” signal is sent to the output while in the right
position only the processed or “wet” signal is sent to the output. The Depth knob is used to control
the amplitude of the effect while the Rate knob is used to fix the modulation frequency of the effect
if the Sync function is off.
6.4.3 Flanger
The Multi-Effect module includes both a mono and stereo flange effect. The flanger effects can
be controlled with the three knobs appearing at the bottom of the module. The Mix knob is used to
adjust the ratio of “dry” and “wet” signal in the output signal from the module. When the knob is
adjusted in the left position, only the original or “dry” signal is sent to the output while in the right
position only the processed or “wet” signal is sent to the output. The Depth knob is used to control
the amplitude of the effect while the Rate knob is used to fix the modulation frequency of the effect
if the Sync function is off.
6.4.4 Phaser
The “phasing” effect colors a signal by removing frequency bands from its spectrum. The effect is
obtained by changing the phase of the incoming signal and adding this new signal to the original.
The phaser effects can be controlled with the three knobs appearing at the bottom of the module.
The Mix knob is used to adjust the ratio of “dry” and “wet” signal in the output signal of the module.
When the knob is adjusted in the left position, only the original or “dry” signal is sent to the output
while in the right position only the processed or “wet” signal is sent to the output. The Depth knob
is used to control the amplitude of the effect while the Rate knob is used to fix the modulation
frequency of the effect when the Sync function is off.
6.4.5 Wah
The Multi-Effect module includes 2 different types of wah effects: wah wah, and auto wah. Both
of them are based on a specially designed bandpass filter with a 12 dB/oct slope. In the wah wah
effect, the center frequency of the bandpass filter varies at a certain rate. In the case of the auto-
wah, the variations of the center frequency is controlled by the amplitude envelope of the incoming
signal.
The Freq knob is used to control the central frequency of the filter. Turning this knob clockwise
increases the center frequency. In the case of the Wah Wah effect, the center frequency will oscillate
around the value fixed by the Freq knob while with the Auto Wah effect, the setting of the Freq will
fix the starting point of the value of the center frequency.
The Depth knob controls the excursion of the center frequency of the filter. In the case of
the Wah Wah effect, this excursion is applied around the value fixed by the Freq knob while in
… 54 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AAS Strum Electric GS-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AAS Strum Electric GS-1 in the language / languages: English as an attachment in your email.

The manual is 2,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info